Ways of restoration of dairy livestock of Ukraine on a new technological basis
DOI:
https://doi.org/10.31548/dopovidi2022.02.008Keywords:
resource-saving technology, prefabricated premises, microclimate, behavior, milking parlors, milk qualityAbstract
The article highlights the results of the evaluation of new spatial planning and technological solutions of dairy farms and the impact of easily collapsible structures of cowsheds on the conditions of keeping highly productive animals and their behavior. The process of milking cows in a specialized milking parlor and directly in the stalls was studied and the indicators of milk quality and its technological properties were determined.
It is established that spatial planning and technological solutions of prefabricated structures of cowsheds by increasing the parameters and volumes per head from 45.6 m3 to 96.3 m3 and their new design have a positive effect on the conditions of high-yielding cows, including gassiness premises and animal behavior.
Studies of the process of milking cows in a specialized milking parlor and at the stall have shown that the milk reflex reflex in cows when using a milking machine type "Parallel" is more fully manifested than in the installation type "Milk pipeline".
It is established that when organizing milking of cows in a specialized milking parlor on the installation type "Parallel" the need for milking machine operators is reduced by 5 times, which reduces labor costs for the production of 1 quintal of milk to the European level. This technology provides high quality milk and its technological properties, which has a positive effect on the economic efficiency of production.
References
Yedyna kompleksna stratehiia ta plan dii rozvytku silskoho hospodarstva ta silskykh terytorii v Ukraini na 2015-2020 roky /Ministerstvo ahrarnoi polityky ta prodovolstva Ukrainy. - Rezhym dostupu: https://minagro.gov.ua/ni-de/16025 ( zvernennia 15.12.2021)
Kozina N.Iu. (2010) Strukturno dynamichni tendentsii u rozvytku haluzi skotarstva Lvivskoi oblasti v poreformenyi period. Ekonomika APK. S. 37–43.
V Radko, Varchenko O., Svynous I., Herasymenko I., Ivanova L. (2019) Strategies For Promoting Sustainable Development Of Dairy Cattle Breeding In Agricultural Enterprises Of Ukraine Int. J. Manag. Bus. Res., 9 (1), 73-90. http://rep.btsau.edu.ua/bitstream/BNAU/2478/1/strategies_for.pdf
Lutsenko M.M., Melnyk Yu.F.(2002) Novitni tekhnolohii vyrobnytstva moloka na rekonstruiovanykh fermakh. Propozytsiia. № 6. S. 22-24. http://www. propozitsiya.com
Lutsenko M.M., Mohylnyi O. (2009) Buduvaty chy rekonstruiuvaty Ahroperspektyva. № 8-9. S. 52-53.
Kudlai I.M. Naukove obgruntuvannia, rozrobka ta zootekhnichna otsinka enerhetychno zbalansovanoho i ekolohichno bezpechnoho biotekhnolohichnoho kompleksu z vyrobnytstva moloka: dysertatsiia doktora s.-h. nauk: 06.02.04. K., 2011. 322 s.
Molochna ferma – komfort tvaryny: Praktychnyi posibnyk ahrariia Ahroekspert. 2010. № Z. S. 72-74.
Lutsenko M., Saliha D. (2006) Otsenka novykh obemno-planyrovochnykh y tekhnolohycheskykh reshenyi lehkozbornykh korovnykov v uslovyiakh Ukrainy Materyalы XIII Mezhdunarodnoho sympozyuma po voprosam mashynnoho doenyia selskokhoziaistvennыkh zhyvotnыkh. – Mynsk, S. 140-146.
Venhliazhy K., Krupinski E. (2006) Tekhnolohiia vyrobnytstva moloka u korivnykakh vidkrytoho typu v Polshchi na prykladi fermy molochnykh koriv doslidnoi stantsii Instytutu zootekhnii Hrodzetsshloneki. Naukovo-tekhnichnyi biuleten. Kharkiv. № 94. S. 460-462.
Antomatische melksysteme AMS (Melkroboter) c. Litzllachner, F. Wolkersolorjer, V. Lenz (etol)// Landwirt: (sonolerbeitage). 2009. № 2. 19 s.
Lutsenko M.M., Halai O.Iu. (2017) Stvorennia komfortnykh umov utrymannia vysokoproduktyvnykh koriv v innovatsiinykh tekhnolohiiakh 36. Nauk, prats UkrNDIPVT im. L. Pohoriloho. Vypusk 21 (35). 313-319 s. http://www.ndipvt.com.ua/oldsite/doc/zbirnyk2017.pdf
Halai O.Iu., Lutsenko M.M. (2018) Sovremenne tekhnolohyy proyzvodstva moloka s yspolzovanyem vыsokoproduktyvnыkh doylnыkh ustanovok «Parallel» y «Karusel» v uslovyiakh Ukraynы Materyalы mezhdunarodnoi nauchno-tekhnycheskoi konferentsyy. Mynsk, 17-18 oktiabria 2018. S. 172-176.
Downloads
Published
Issue
Section
License
Relationship between right holders and users shall be governed by the terms of the license Creative Commons Attribution – non-commercial – Distribution On Same Conditions 4.0 international (CC BY-NC-SA 4.0):https://creativecommons.org/licenses/by-nc-sa/4.0/deed.uk
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
