Analytics of algorithm for control of technical condition parameters of on-board system of grain harvester based on processing of fast-changing values
DOI:
https://doi.org/10.31548/dopovidi.3(109).2024.020Keywords:
Analytics of algorithm for control of technical condition parameters of on-board system of grain harvester based on processing of fast-changing valuesAbstract
- Analytics of algorithm for control of technical condition parameters of on-board system of grain harvester based on processing of fast-changing values
References
Aulin, V., Rogovskii, I., Lyashuk, O., Titova, L., Hrynkiv, A., Mironov, D., Volianskyi, M., Rogatynskyi, R., Solomka, O. & Lysenko, S. (2024). Comprehensive assessment of technical condition of vehicles during operation based on Harrington’s desirability function. Eastern-European Journal of Enterprise Technologies, 1 (3 (127)), 37–46. https://doi.org/10.15587/1729-4061.2024.298567.
Parekh, D., Poddar, N., Rajpurkar, A., Chahal, M., Kumar, N., Joshi, G. P. & Cho, W. (2022). A review on autonomous vehicles: progress, methods and challenges. Electronics, 11 (14), 2162. https://doi.org/10.3390/electronics11142162.
Casado-Sanz, N., Guirao, B. & Attard, M. (2020). Analysis of the risk factors affecting the severity of traffic accidents on spanish crosstown roads: the driver’s perspective. Sustainability, 12 (6), 2237. https://doi.org/10.3390/su12062237.
Abu Dabous, S., Ibrahim, F., Feroz, S. & Alsyouf, I. (2021). Integration of failure mode, effects, and criticality analysis with multi-criteria decision-making in engineering applications: Part I – Manufacturing industry. Engineering Failure Analysis, 122, 105264. https://doi.org/10.1016/j.engfailanal.2021.105264.
Ahmed, E., Gharavi, H. (2018). Cooperative vehicular networking: a survey. IEEE Transactions on Intelligent Transportation Systems, 19 (3), 996–1014. https://doi.org/10.1109/tits.2018.2795381.
Dela Cruz, O.G., Padilla, J.A. & Victoria, A.N. (2021). Managing Road Traffic Accidents: A Review on Its Contributing Factors. IOP Conference Series: Earth and Environmental Science, 822 (1), 012015. https://doi.org/10.1088/1755-1315/822/1/012015.
Britton, M., Asnaashari, S. & Read, G. (2016). Analysis of train derailment cause and outcome in Victoria, Australia, between 2007 and 2013: implications for regulation. Journal of Transportation Safety & Security, 9 (1), 45–63. https://doi.org/10.1080/19439962.2015.1088906.
Chen, X., Chen, J. (2020). Optimization of the impeller geometry for an automotive torque converter using response surface methodology and desirability function. Open Journal of Applied Sciences, 10 (07), 455–475. https://doi.org/10.4236/ojapps.2020.107032.
Gorea, R. K. (2016). Financial impact of road traffic accidents on the society. International Journal of Ethics, Trauma & Victimology, 2 (01), 6–9. https://doi.org/10.18099/ijetv.v2i1.11129
Kuzmich, I.M., Rogovskii, I.L., Titova, L.L. & Nadtochiy, O.V. (2021). Research of passage capacity of combine harvesters depending on agrobiological state of bread mass. IOP Conference Series: Earth and Environmental Science. 677, 052002, https://doi.org/10.1088/1755-1315/677/5/052002.
Dirnbach, I., Kubjatko, T., Kolla, E., Ondruš, J. & Šarić, Ž. (2020). Methodology Designed to Evaluate Accidents at Intersection Crossings with Respect to Forensic Purposes and Transport Sustainability. Sustainability, 12 (5), 1972. https://doi.org/10.3390/su12051972.
Low, R., Tekler, Z. & Cheah, L. (2020). Predicting commercial vehicle parking duration using generative adversarial multiple imputation networks. transportation research record. Journal of the Transportation Research Board, 2674(9), 820–831. https://doi.org/10.1177/0361198120932166.
Oladimeji, D., Gupta, K., Kose, N., Gundogan, K., Ge, L. & Liang, F. (2023). Smart transportation: an overview of technologies and applications. Sensors, 23 (8), 3880. https://doi.org/10.3390/s23083880.
Rogovskii, I., Sivak, I., Shatrov, R., & Nadtochiy, O. (2024). Agroengineering studies of tillage and harvesting parameters in soybean cultivation. Engineering of Rural Development, 23, 965–970. https://doi.org/10.22616/ERDev.2024.23.TF195.
Padilla-Atondo, J. M., Limon-Romero, J., Perez-Sanchez, A., Tlapa, D., Baez-Lopez, Y., Puente, C. & Ontiveros, S. (2021). The impact of hydrogen on a stationary gasoline-based engine through multi-response optimization: a desirability function approach. Sustainability, 13 (3), 1385. https://doi.org/10.3390/su13031385.
Nazarenko, I., Bernyk, I., Dedov, O., Rogovskii, I., Ruchynskyi, M., Pereginets, I., & Titova, L. (2021). Research of technical systems of processes of mixing materials. Dynamic processes in technological technical systems. Kharkiv: РС Тесhnology Сеntеr. 57-76. https://doi.org/10.15587/978-617-7319-49-7.ch4.
Prytz, R., Nowaczyk, S., Rögnvaldsson, T. & Byttner, S. (2015). Predicting the need for vehicle compressor repairs using maintenance records and logged vehicle data. Engineering Applications of Artificial Intelligence, 41, 139–150. https://doi.org/10.1016/j.engappai.2015.02.009.
Rogovskii, I., Lyubarets, B. & Borek, K. (2022). Analyticity of non-stationary processes of change in diagnostic parameters of hydrostatic transmissions of harvesters. Machinery and Energetics, 13(1), 67–76. https://doi.org/10.31548/machenergy2022.01.067.
Rogovskii, I.L. (2021). Analyticity of complex criteria for evaluation of grain production in agricultural enterprises intensification of engineering management. Machinery and Energetics, 12(4), 129–138. https://doi.org/10.31548/machenergy2021.04.129
Rogovskii, I.L. (2021). Influence of operating failure of agricultural machines on efficiency of their machine use. Machinery and Energetics, 12(3), 157–166. https://doi.org/10.31548/machenergy2021.03.157
Rogovskii, I.L. (2021). Models of formation of engineering management alternatives in methods of increasing grain production in agricultural enterprises. Machinery and Energetics, 12(1), 137–146, https://doi.org/10.31548/machenergy2021.01.137.
Rogovskii, I. L. (2021). Resource of removal expenses for strong agricultural period of volume of operations. Machinery and Energetics, 12(2), 123–131. https://doi.org/10.31548/machenergy2021.02.123.
Rolison, J., Regev, S., Moutari, S. & Feeney, A. (2018). What are the factors that contribute to road accidents? An assessment of law enforcement views, ordinary drivers’ opinions, and road accident records. Accident Analysis & Prevention, 115, 11–24. https://doi.org/10.1016/j.aap.2018.02.025.
Slobodyanyuk, M., Gorobchenko, O. (2020). Structural analysis of territorial transport systems based on classification methods. Eastern-European Journal of Enterprise Technologies, 1 (4(103)), 23–32. https://doi.org/10.15587/1729-4061.2020.194158.
Volokha, M., Rogovskii, I., Fryshev, S., Sobczuk, H., Virchenko, G. & Yablonskyi, P. (2023). Modeling of transportation process in a technological complex of beet harvesting machines. Journal of Engineering Sciences (Ukraine), 10(2), F1-F9, https://doi.org/10.21272/jes.2023.10(2).f1.
Young, W., Sobhani, A., Lenné, M. & Sarvi, M. (2014). Simulation of safety: A review of the state of the art in road safety simulation modelling. Accident Analysis & Prevention, 66, 89–103. https://doi.org/10.1016/j.aap.2014.01.008.
Downloads
Published
Issue
Section
License
Relationship between right holders and users shall be governed by the terms of the license Creative Commons Attribution – non-commercial – Distribution On Same Conditions 4.0 international (CC BY-NC-SA 4.0):https://creativecommons.org/licenses/by-nc-sa/4.0/deed.uk
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
