РЕАЛІЗАЦІЯ ОПТИМАЛЬНОГО РЕЖИМУ РУХУ РОЛИКА ФОРМУЮЧОЇ УСТАНОВКИ НА ПРИСКОРЕННЯ ЧЕТВЕРТОГО ПОРЯДКУ

Authors

  • В. С. Ловейкін National University of Life and Environmental Sciences of Ukraine image/svg+xml
  • К. І. Почка Kyiv National University of Construction and Architecture image/svg+xml

Abstract

В цілях збільшення надійності і довговічності ролика формуючи встановлення оптимального режиму руху вперед і назад в формуючої візки на розгін четвертого порядку розраховується. Кінематичні характеристики формуючи кошик при оптимальному режимі руху на прискорення четвертого порядку розраховуються. Дизайн роликові формувальні установки з приводом від високого моменту крокового двигуна, який побудований на прокатних роликів, утворюють візок і забезпечує оптимальний режим руху вперед і назад формуючої візки на розгін четвертого порядку. Використання в установці зазначеного приводного механізму призводить до покращення якості оброблюваної поверхні бетонної суміші, зниження динамічних навантажень в елементах приводного механізму, до зникнення зайвого руйнівних навантажень конструкція рами і, відповідно, збільшити надійність і довговічність установки в цілому. 

References

Garnec V. M. The progressive the forming units and complexes of concrete. Kyiv. Budіvelnyk. 1991. 144 p.

Kuzin V. N. Technology of roller formation of flat articles from fine-grained concrete: The abstract of the thesis for a degree of the candidate of science. Moscow. 1981. 20 p.

Rjushin V. T. Research of working process and de-velopment of a method of calculation of cars of roller formation of concrete mixes. The thesis for a degree of Candidate of Technical Sciences. Kyiv. 1986. 186 p.

Loveykіn V. S., Garnec V. M., Pochka K. І. Patent of Ukraine for an invention № 67091 A. Installation for formation of products from concrete mixes. № u2003076371 it is stated 08.07.2003; it is published 15.06.2004. Bulletin № 6.

Loveykіn V. S., Pochka K. І. The dynamic analysis of roller forming installation with the rekuperativ drive. Dynamics. durability and reliability of farm vehicles: Works of the First International scientific and technical conference (DSR AM - I). on October 4-7. 2004. Ternopil (Ukraine). P. 507-514.

Loveykіn V. S., Pochka K. І. The power analysis of roller forming installation with the rekuperativ drive. Sci-entific and technical magazine «Technology of construc-tion». Kyiv. 2003. No 14. P. 27-37.

Loveykіn V. S., Pochka K. І. The analysis of une-venness of the movement of roller forming installation with the rekuperativ drive. Scientific and technical and production magazine «Hoisting-and-transport equip-ment». 2005. No 4. P. 19-33.

Loveykіn V. S., Pochka K. І., Palamarchuk D. A. Optimization of design data of the driving mechanism of roller forming installation with the rekuperativ drive. Sci-entific and technical magazine «Technology of construc-tion». Kyiv. 2004. No 15. P. 40-48.

Pochka K. І. Development and the analysis of roll-er forming installation with the rekuperativ drive. The abstract of the thesis for a degree of Candidate of Tech-nical Sciences. Kyiv. KNUCA. 2008. 24 p.

Loveykіn V. S., Kovbasa V. P., Pochka K. І. The dynamic analysis of roller forming installation with ener-getically balanced drive. Scientific Herald of NULES of Ukraine. Series: Technique and energy of APK. Kyiv. 2010. No 144. part 5. P. 338-344.

Loveykіn V. S., Kovbasa V. P., Pochka K. І. The power analysis of roller forming installation with energeti-cally balanced drive. Scientific bulletin of the Tavriysky state agro technological university. Melіtopol. 2011.

No 1. Tom 2. P. 16-23.

Loveykіn V. S., Pochka K. І. The analysis of une-venness of the movement of roller forming installation with energetically balanced drive. Vibrations in the equipment and technologies. 2010. No 4 (60). P. 20-29.

Loveykіn V. S., Pochka K. І. Optimization of de-sign data of roller forming installation with energetically balanced drive. MOTROL. Motorization and power industry in agriculture. Lublin. 2010. Tom 12 B. P. 9-18.

Loveykіn V. S., Pochka K. І. The analysis of the movement of roller forming installation with the balanced drive. Bulletin of the Kharkiv national automobile and road university. 2004. No 27. P. 95-101.

Loveykіn V. S., Pochka K. І. The power analysis of roller forming installation with the balanced drive. Sci-entific bulletin of National agricultural university. 2005. No 80. P. 346-356.

Loveykіn V. S. Assessment of the movement of mechanisms and cars. Hoisting-and-transport equipment. Kyiv. Tehnika. P. 16-18.

Lovejkіn V. S., Shumіlov G. V. Optimization of the mode of change of a departure of the tower crane behind single kinematic criteria. MOTROL. Motorization and power industry in agriculture. Lublin. 2011. Tom 13 B. P. 167-174.

Loveykіn V. S., Pochka K. І. The analysis of une-venness of the movement of roller forming installation with the balanced drive. MOTROL. Commission of Mo-torization and Energetics in Agriculture. Lublin-Rzeszow. 2015. Vol. 17. No 3. P. 17-27.

Loveykіn V. S., Pochka K. І. Analysis of dynamic equilibration by the drive of cars of roller formation. MOTROL. Commission of Motorization and Energetics in Agriculture. Lublin-Rzeszow. 2016. Vol. 18. No 3.

P. 41-52.

Loveykіn V. S., Pochka K. І. Dynamic optimiza-tion of the mode of reversal of roller forming installation. Collection of scientific tinders «Mechanical engineering». Harkіv. Ukrainian engineering and pedagogical academy. 2015. No 15. P. 76-86.

Loveykіn V. S., Pochka K. І. Optimization of the breakthrough mode of reversal of roller forming installa-tion. Scientific Herald of NULES of Ukraine. Series: Technique and energy of APK. Kyiv. 2015. No 212.

part 1. P. 186-197.

Loveykіn V. S., Pochka K. І. Optimization of the mode of reversal of roller forming installation on acceler-ation of the third order. Bulletin of the Donbass state ma-chine-building academy: collection of scientific works. Kramatorsk. 2015. No 3 (36). P. 16-26.

Loveykіn V. S., Pochka K. І. Synthesis of cam-shaft driving mechanism in roller molding installation with combined motion mode according to acceleration of third order. Science & Technique. Minsk. BNTU. 2017. No 16(3). P. 206-214. DOI:10.21122/2227-1031-2017-16-3-206-214.

Loveykin V. S. Calculations of the optimum modes of the movement of mechanisms and cars. Man-ual. Kyiv. UMK VO. 168.

Lovejkіn V. S., Pochka K. І., Chovnjuk Ju. V., Dikteruk M. G. Patent of Ukraine for an invention № 105744. Installation for formation of products from con-crete mixes. № а201309305 it is stated 25.07.2013; it is published 10.06.2014. Bulletin № 11.

Downloads

Published

2019-07-11

Issue

Vol. 9 No. 2 (2018)

Section

Статті

License

Relationship between right holders and users shall be governed by the terms of the license Creative Commons  Attribution – non-commercial – Distribution On Same Conditions 4.0 international (CC BY-NC-SA 4.0):https://creativecommons.org/licenses/by-nc-sa/4.0/deed.uk

Authors who publish with this journal agree to the following terms:

  • Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
  • Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  • Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).