Analytical determination of power characteristics of ink-jet elements of automated metering systems

Authors

  • V. V. Aulin Central Ukrainian National Technical University image/svg+xml
  • M. I. Chernovol Central Ukrainian National Technical University image/svg+xml
  • A. O. Pankov Central Ukrainian National Technical University image/svg+xml

Abstract

Abstract. The use of pneumatic jet elements in sowing systems can improve the efficiency of sowing machines. However, the use of power jet elements in sowing technology is hampered by insufficient knowledge of their working processes. The paper considers the experimental research methods used and proposes an analytical approach to the development of power jet elements, on the basis of which their size and energy characteristics and modes of operation are determined.
Key words: jet element, seeding system, fluidics, automation, modeling, seeding, thread, process.

References

Список літератури

Денисов А. А. Нагорный В. С. Пневматические и гидравлические устройства автоматики. Москва. Высшая школа. 1978. 214 с.

Елимелех ?. М., Сидоркин Ю. Г. Струйная автоматика (пневмоника). Ленинград. Лениздат. 1972. 211 с.

?льина Т. Е., Продан Н. В. Проектирование элемента струйной системы управления газостатическим подшипником. Научно-технический вестник информационных технологий, механики и оптики. Том 15, №5. ?здательство. Санкт-Петербургский национальный исследовательский университет информационных технологий, механики и оптики. Санкт-Петербург. 2015. С. 921–929.

Лебедев ?. В., Трескунов С. Л., Яковенко В. С. Элементы струйной автоматики. Москва. Машиностроение. 1973. 360 с.

Мурзинов В. Л. Методы пневмоники в управлении струйными потоками в системах транспортирования на воздушной подушке. Политематический сетевой электронный научный журнал Кубанского государственного аграрного университета. 2011. № 74 (10). С.25–34.

Панков А. А., Аулин В. В., Черновол М. ?. Технические средства процесса высева на основе элементов пневмоники: монография. Кировоград. издатель Лысенко В. Ф. 2016. 242 с.

Попов Ю., Пухначев Ю. Пневмоника. Наука и жизнь. 1965. №1. С. 10–18.

Сёмин Д. А., Роговой А. С. Влияние типа и размера расчетных сеток на точность расчета течений в вихрекамерных нагнетателях. Вісник Національного технічного університету "Харківський політехнічний інститут". Випуск: гідравлічні машини та гідроагрегати. Bulletin of National Technical University "KhPI" : coll. of sci. papers. Ser.: Hydraulic machines and hydrounits. Харків. 2016. № 41 (1213). С. 70–77.

Черновол М. ?., Аулин В. В., Панков А. А. Моделирование силовых пневмоструйных элементов высевающих аппаратов. Вісник інженерної академії України. 2015. № 4. С. 175–179.

References

Denisov, A. A. Nagorny, V. S. (1978). Pneumatic and hydraulic automation devices. Moscow. High school. 214.

Elimelech, I. M., Sidorkin, J. G. (1972). Inkjet automation (pneumonia). Leningrad. Lenizdat. 211.

Ilina, I.E., Prodan, N. V. (2015). Design of the jet element of the control system of gas-static bearing. Scientific and technical journal of information technologies, mechanics and optics. Volume 15. No 5. Publisher. Saint-Petersburg National Research University of information technologies, mechanics and optics. Saint-Petersburg. 921-929.

Lebedev, V. I., Treskunov, S. L., Yakovenko, V. S. (1973). Elements of the jet automatics. Moscow. Engineering. 360.

Murzinov, V. L. (2011). Methods of fluidics in control of jet flows in the transportation systems of the hovercraft. Polythematic network electronic scientific journal of the Kuban state agrarian University. № 74 (10).

Pankov, A. O., Aulin, V. V., Chernovol. M. I. (2016). Technical means of the process of seeding based on the elements of fluidics. Kirovograd. publisher Lysenko, V., 242.

Popov, Yu., Pukhnachev, Yu. (1965). Pneumonia. Science and life. No 1. 10-18.

Syomin, D. A., Rogovoy, A. S. (2016). Effect of type and size of the computational mesh on the accuracy of calculation of currents in the swirl-chamber blowers. Bulletin of National technical University "KhPI" : coll. of sci. papers. Ser.: Hydraulic machines and hydrounits. Kharkiv. № 41 (1213). 70–77.

Chernovol. M. I., Aulin, V. V., Pankov, A. O. (2015). Simulation of power pneumotropic elements of the sowing units. Bulletin of Engineering Academy of Ukraine. No 4. 175-179.

Downloads

Published

2019-01-24

Issue

Vol. 9 No. 3 (2018)

Section

Статті

License

Relationship between right holders and users shall be governed by the terms of the license Creative Commons  Attribution – non-commercial – Distribution On Same Conditions 4.0 international (CC BY-NC-SA 4.0):https://creativecommons.org/licenses/by-nc-sa/4.0/deed.uk

Authors who publish with this journal agree to the following terms:

  • Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
  • Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  • Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).