Modeling work of doelle apparatus with adaptive daily assets

Authors

  • О. S. Gavrilchenko , Дніпровський державний аграрно-економічний університет,
  • О. V. Mytsyk , Дніпровський державний аграрно-економічний університет,

Abstract

Abstract. One of the factors affecting milk quality and cow health is the milking machine. Domestic milking machines, which are produced serially, operate in a constant hard mode, which leads to inhibition of milk yield and a significant decrease in the productivity of animals. The purpose of the research is to simulate the operation of the milking machine with the collector of adaptive milking and to determine its rational design-regime parameters. The design parameters of the developed reservoir were calculated and the pulsogram of the milking machine was developed with a developed collector: certain working cycles for the interstitial and sucker chambers of the teat cup.
Key words: milking, milking installation, collector, parameters, pulseogram.

References

Карташов Л. П. Контроль при машинномдоении. Москва. Россельхозиздат, 1977. 48 с.

Королев В. Ф. Доильные машины: теория,конструкция и расчёт. ?зд. 2-е перераб. и доп. Москва. Машиностроение, 1969. 279 с.

Макаровская З. В. Технологические основыповышения эффективности работы доильных аппаратов: дисс. доктора техн. наук: 05.20.01. Макаровская Зоя Вячеславовна. Оренбург. 2004. 380 с.

Алієв Е. Б. огли. Підвищення ефективностіексплуатації вакуумної системи молочно-доїльного обладнання: дис. ... канд. техн. наук: 05.05.11. Алієв Ельчин Бахтияр огли. Запоріжжя, 2012. 177 с.

Карташов Л. П., Куранов Ю. Ф. Машинноедоение коров. Москва. Высшая школа, 1980. 223 с.

Фененко А. І. Механізація доїння корів. Теорія іпрактика: монографія. Київ. 2008. 198 с.

Шевченко І. А., Алієв Е. Б. Науково-методичнірекомендації з багатокритеріального виробничого контролю доїльних установок. Запоріжжя. Акцент Інвест-трейд, 2013. 156 с. ISBN 978-966-2602-41-VIII.

Мельников С. В. Механизация и автоматизацияживотноводческих ферм. Ленинград. Колос. Ленинградское отделение, 1978. 559 с.

Фененко А. ?., Карташов Л. П. Режимнаяхарактеристика биотехнического звена “машина–животное” процесса выведения молока из вымени коров. Механізація та електрифікація сільського господарства. Глеваха. 2010. Вип. 94. С. 63–248.

Kartashov, L. P. (1977). Control during machinemilking. Moscow. Rosselkhozizdat, 48.

Korolev, V. F. (1969). Milking machines: theory,design and calculation. Ed. 2. Moscow. Mechanical engineering, 279.

Makarov, F. V. (2004). Technological bases ofincrease of efficiency of milking machines. Dr. Techn. Sciences: 05.20.01. Makarov Zoe Vyacheslavovna. Orenburg. 380 p

Aliyev, E. B. ogli. (2012). Improving the efficiencyof operation of the vacuum system of milk-milking equipment: dis. kand. tech. Sciences: 05.05.11. Elchin Aliyev Bakhtiyar ogly. Zaporozhye, 177.

Kartashov, L. P., Kuranov, Y. F. (1980). Machinemilking of cows. Moscow. Higher school, 223.

Fenenko, A. I. (2008). Mechanization of milkingcows. Theory and practice: monograph. Kiev. 198.

Shevchenko, I. A., Aliev, E. B. (2013). Would.Scientific guidance on multi-criteria operational control of milking machines. Zaporizhia. Accent invest-TREJJD, 156. ISBN 978-966-2602-41 VIII.

Melnikov, S. V. (1978). Mechanization andautomation of livestock farms. Leningrad. Ear. Leningrad branch, 559 p

Fenenko, A. S., Kartashov, L. P. (2010).Performance characteristic of biotech link “machine–animal” of the process of removing milk from the udder of cows. Mechanization and electrification of agriculture. Glevaha. Vol. 94. 63-248.

Downloads

Published

2019-01-24

Issue

Vol. 9 No. 3 (2018)

Section

Статті

License

Relationship between right holders and users shall be governed by the terms of the license Creative Commons  Attribution – non-commercial – Distribution On Same Conditions 4.0 international (CC BY-NC-SA 4.0):https://creativecommons.org/licenses/by-nc-sa/4.0/deed.uk

Authors who publish with this journal agree to the following terms:

  • Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
  • Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  • Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).