Implementation of technological production lines fuel granules from wastewater woodworking and furniture manufacture on private enterprise "Malinska furniture factory"
Abstract
Abstract. Monthly on the state of emergency "Ma-linska furniture factory" 750 tons of wood raw materials are processed, after processing of which remains 592 tons of waste. Until recently, only 274 tons could be used for processing into fuel pellets, and 318 tons due to high hu-midity, the presence of ash-forming impurities, additives of glue, were unsuitable for this. Due to the introduction of a new production line for the production of fuel pellets from wood processing waste and furniture production, which consists of a grinding shop, a drying plant, storage and intermediate bunkers, a final crusher, granulators, sifter, cooler and casing machine, raw materials from the bark and use raw wood waste. As a result, the amount of waste suitable for the production of fuel pellets increased to 525 tons/month. In the production line of fuel pellets, four self-made twin granulators with a capacity of 500 kg/hr are used with an annular matrix with a design diam-eter of 152 mm and one roller with a diameter of 88 mm. The rated working frequency of rotation of the matrix is 315 rpm. For the drive of the granulator, a motor-reducer MP1-315 with an electric motor of 30 kW is used.
Key words: furniture factory, fuel granules, matrix, wood waste, furniture manufacturing waste.
References
Polishchuk V., Naumenko V, Naumenko O. Justifi-cation of capacity of the pellets granulation line at private enterprise "Malyn furniture factory". Teka commission of motorization and power industry in agriculture. 2018. Vol. 18, № 1. P. 7–16.
Головков С. ?., Коперин ?. Ф., Найденов Б. Ф.Энергетическое использование древесных отходов. М.: Лесн. пром-сть, 1987. 224 с.
Найденов Б. Ф. Объемные веса и удельныеобъемы грузов: справочник. Москва. Транспорт, 1971. 160 с.
Підготовка та впровадження проектів замі-щення природного газу біомасою при виробництві те-плової енергії в Україні. За ред. Г. Гелетухи. Київ. Поліграф плюс, 2015. 72 с.
Сборник методик по расчету объемов образо-вания отходов. Санкт-Петербург. ЦОЭК, 2004. 77 с.
Комплекс RK 847. Матеріали из сайту АРІЄСУКРАЇНА. URL: http://arjes.com.ua/production/ kompleks-rk-847.html (дата доступу: 18.06.2018).
Рубальна машина RM 41. Матеріали из сайтуАРІЄС УКРАЇНА [Електронний ресурс]. URL: http://arjes.com.ua/production/rubalna-mashyna-rm-41.html (дата доступу: 18.06.2018).
Сито барабанне для просіювання щепи, каліб-рування різних фракцій. Матеріали из сайту all.biz [Електронний ресурс]. URL: https://ua.all.biz/sito-barabanne-dlya-prosyuvannya-shchepi-g15731079 (дата доступу: 18.06.2018).
Молотковий подрібнювач RM 71. Матеріали изсайту АРІЄС УКРАЇНА [Електронний ресурс]. URL: http://arjes.com.ua/production/molotkovyj-podribnjuvach-rm-71.html (дата доступу: 18.06.2018).
Дубровін В. О., Поліщук В. М., Тарасенко С. Є.,Драгнєв С. В. Практикум з машин та обладнання для біоенергетики. Київ. АграрМедіаГруп, 2013. 208 с.
Поліщук В. М., Дубровін В. О., Драгнєв С. В.Інженерія систем природокористування. Ч. 2. Конс-труктивно-технологічний розрахунок гранулятора з круглою матрицею для виробництва гранульованого біопалива. Київ. АграрМедіаГруп, 2013. 48 с.
Поліщук В. М., Тарасенко С. Є. Біопалива.Виробництво і використання. Київ. ЦП "КОМПР?НТ". 2017. 376 с.
Поліщук В. М., Тарасенко С. Є. Машини таобладнання біоенергетики. Ч. 2. Конструктивно-технологічний розрахунок гранулятора з круглою ма-трицею в лінії виробництва паливних гранул. Київ. НУБіП України, 2016. 34 с.
References
Polishchuk, V., Naumenko, V, Naumenko, O.(2018). Justification of capacity of the pellets granulation line at private enterprise "Malyn furniture factory". Teka commission of motorization and power industry in agri-culture. 18(1). 7-16.
Golovkov, S. I., Koperin, I. F., Naydenov, B. F.(1987). Energeticheskoe ispolzovanie drevesnyh othodov [Energy use of wood waste]. Moscow: Forest Industry, 224.
Naydenov, B.F. (1971). Volumetric weights andspecific volumes of goods: reference book. Moscow: Transport. 160.
Geletukha, G. (2015). Preparation and implementation of natural gas biomass substitution projects for the production of heat energy in Ukraine. Kyiv: Polygraph Plus. 72.
Collection of methods for calculating wastegeneration volumes. St. Petersburg: CECEC. 77.
Complex RK 847. ARIESUS UKRAINE. Availableat: http://arjes.com.ua/production/kompleks-rk-847.html.
RM 41 chipper.. ARIESUS UKRAINE. Availableat: http://arjes.com.ua/production/rubalna-mashyna-rm-41.html.
Sieve drum for sieving, calibration of differentfactions. all.biz. Available at: https://ua.all.biz/sito-barabanne-dlya-prosyuvannya-shchepi-g15731079.
Hammer crushers RM 71. ARIESUS UKRAINE.Available at: http://arjes.com.ua/production/molotkovyj-podribnjuvach-rm-71.html.
Dubrovin, V. O., Polishchuk, V. M., Tarasenko, S. E.,Dragnev, S. V. (2013). Workshop on machinery and equipment for bioenergy. Kyiv. Agrar Media Group. 208.
Polishchuk, V. M., Dubrovin, V. O., Dragnev, S. V.(2013). Engineering systems of nature management. Part 2.Structural and technological calculation of granulatorwith a round matrix for the production of granulated biofuels: methodical instructions for the implementation of laboratory works. 48.
Polishchuk, V. M., Tarasenko, S. E. (2017).Biofuels. Production and use. 376.
Polishchuk, V. M., Tarasenko, S. E. (2016).Machines and equipment of bioenergy. Part 2. Structural and technological calculation of granulator with a round matrix in the line of production of fuel pellets: methodical instructions for the implementation of laboratory works. 34.
Downloads
Published
Issue
Section
License
Relationship between right holders and users shall be governed by the terms of the license Creative Commons Attribution – non-commercial – Distribution On Same Conditions 4.0 international (CC BY-NC-SA 4.0):https://creativecommons.org/licenses/by-nc-sa/4.0/deed.uk
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
