Statistical model of reliability of cultivators with vibratory movement of working bodies
DOI:
https://doi.org/10.31548/machenergy2019.01.005Keywords:
reliability, cultivator, elastic rack, statistical analysis, statistical model of reliability.Abstract
A representative statistical analysis of the operational information on the reliability of tillage units with oscillatory movement of the working bodies was performed. The results of work under the operating conditions of thirteen cultivators with a total operating time of more than 280 thousand hectares are considered. Operational studies were conducted in 7 regions of Ukraine and characterized various soil and climatic conditions: the mechanical properties of the soil, density, humidity, and so on. The occurrence of sudden failures due to the fracture of the elastic racks of the cultivators' working bodies has been established 42 sudden failures among 260 racks tested were recorded.
Using the method of statistical analysis of reliability that meets the industry standard of the Ministry of Agrarian Policy of Ukraine SOU 74.3-37-04604309-904:2011 “Evaluation of reliability indicators with reduced life tests”, the probability of failure-free operation of the elastic cultivator stand and the change of this indicator depending on the operating time of the unit were determined. It is established that the statistical model of reliability corresponds to the theoretical model of quasi-static destruction of sequential systems.
The gamma-percentage resource of the rack for sudden failures at various values of gamma is determined. Two possible directions of work have been proposed, which should lead to an improvement in the quality of the elastic struts of cultivators with oscillating motion of the working bodies. The sufficiency of the obtained data is indicated for the application of the concept of the inversion method combining theoretical models of reliability with specific indicators of the statistical model obtained depending on the operating time of the elastic struts to ensure the manageability of the results of improving their quality.
References
Belyaev, Yu. K. (1984). Non-parametric methods in problems of processing test results and operation. Moscow. 60.
Belyaev, Yu. K. (1987). Statistical methods for processing incomplete data on product reliability. Moscow. 55.
Grinchenko, A. S. (2012). Mechanical reliability of mobile machines: Evaluation, modeling, control. Kharkiv. 259.
GOST 27.504-84. (1984). Reliability in engineering. Methods for assessing the reliability of censored samples. Moscow. 41.
Grinchenko, A. S., Alfyorov, A. I. (2017). Fundamentals of forecasting and reliability management under extreme loads. Kharkiv. 36.
Grinchenko, O. S., Alfyorov, O. I., Yuryeva, G. P. (2018). The prognosis and the kerwan mechanic supernova for the extraverse method. Technical service of agropromislovy, lisovogo and transport complex. № 12. 210-213.
DSTU 2860-94. (1994). Reliability technics. Terms and conditions. Kyiv. 88.
G. Upton, I. Cook. (2008). Oxford dictionary of Statistics. 453.
https://doi.org/10.1093/acref/9780199541454.001.0001
Grinchenko, A. S. (2001). Numerical solution of problems of forecasting and ensuring strength reliability with multiple overloads. Visnik HDTUSG. Kharkiv. Vol. 8. T. 1. 257-264.
Grinchenko, A. S. (2003). Some applied models of strength reliability with sudden failures. Bulletin of the National Technical University "KPI". Kharkov, No 12. Vol. 1. 51-58.
Bolotin, V. V. (1971). Application of the methods of probability theory and reliability theory in the calculations of structures. Moscow. 256.
Zhovdak, V. A., Mishchenko, I. V. (1999). Prediction of the reliability of structural elements taking into account technological and operational factors. Kharkov. 120.
Anilovich, V. Ya., Grinchenko, A. S., Litvinenko, V. L. (2001). Reliability of machines in problems and examples. Kharkov. 320.
Soong, T. T. (2004). Fundamentals of Probability and Statistics, Engineers, State University of New York at Buffalo, Buffalo, New York, USA.
Alfyorov, O. I. (2015). Dynamics of movement and reliability of the working bodies of tillage units on the elastic suspension. Bulletin of the Kharkiv National University of Agriculture named after Peter Vasilenko. Kharkiv. Vol. 158. 271-278.
Grinchenko A. S., Alfyorov, O. I. (2015). Theoretical models of functioning and ensuring the mechanical reliability of cultivators with spring-loaded working bodies. National interdepartmental scientific and technical collection. Kirovograd. Vol. 45, Part I. 205-212.
Downloads
Published
Issue
Section
License
Relationship between right holders and users shall be governed by the terms of the license Creative Commons Attribution – non-commercial – Distribution On Same Conditions 4.0 international (CC BY-NC-SA 4.0):https://creativecommons.org/licenses/by-nc-sa/4.0/deed.uk
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
