Study of transverse negativity of strip tilling soil
DOI:
https://doi.org/10.31548/machenergy2019.02.023Keywords:
front disc, chisel, cutting side disc, processing quality, depth of processing, distance from the bit to the axis of the cutting discs, distance from the axis of the front disc to the bit.Abstract
To perform band processing on each section of the unit, working bodies are fixed, designed to change the physical and mechanical composition of the soil. Changing the parameters of the placement of the working bodies due to the achievement of the goal - the appropriate quality of processing with an average transverse unevenness of the treated strips up to 15% in accordance with the method of cord elongation. The results of experimental studies of the dependence of the transverse non-uniformity of the treated strip on the change in the relative position of the front disc, chisel and side cutting discs of the section of the unit for strip tillage are presented.
According to the results of visual evaluation of processing quality, as well as measurements of the test strips, it was determined that the optimal distance from the axis of the front disc to the bit is 55 cm. The results of previous studies were confirmed, the distance from the bit to the axis of the cutting discs should be 50 cm. up to 27 cm. Further studies require a more detailed study of the influence on the transverse non-uniformity of changes in the configuration of the placement of the working bodies of the section of the unit for strip tillage, as well as energy performance indicators, such as fuel consumption.
References
Golub G., Dvornik A. (2018). Reference of quality and hornomic requirements for groundwater protection indicators. Scientific Horizons. Scientific Journal. Zhytomyr, 12 (73), 37-44. https://doi.org/10.33249/2663-2144-2018-73-12-37-44
Lebedyev S., Korobko A., Kozlov Yu. (2017). On the measurement of accuracy of measurements during tests of agricultural machines. Technics and technology, 10 (97), 22-25.
Ovcharenko A. S., Ovcharenko A. A. (2004). Method of belt soil cultivation and device for its implementation. Patent of Ukraine for utility model. A01B 79/00, A01B 13/16. № 2004010550 declared 26.01.2004; published 15.10.2004, № 10.
Ponomar Yu. V., Korniushyn V. M., Datko V. D., Ponomar M. Yu., Palahniuk A. A., Lukashenko R. M. (2016). The method of strip tillage with the help of systems of soil-working devices. Patent of Ukraine for invention. A01B 49/02; A01B 79/02. № 111055 declared 28.09.2015; published 10.03.2016, № 5.
Downloads
Published
Issue
Section
License
Relationship between right holders and users shall be governed by the terms of the license Creative Commons Attribution – non-commercial – Distribution On Same Conditions 4.0 international (CC BY-NC-SA 4.0):https://creativecommons.org/licenses/by-nc-sa/4.0/deed.uk
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
