Further scrolling mode for diagnosing cylinder-piston group of engines of machines for forestry machinery

Authors

DOI:

https://doi.org/10.31548/machenergy2019.03.031

Keywords:

cylinder-piston group, diagnosis, speed, compression, pressure waveform, modes, parameters.

Abstract

The article analyzes methods of diagnosing cylinder-piston group (CPG) of internal combustion engines. The specified method of diagnostics is offered, combining all the positive sides of the existing methods and solves the problem of increasing the reliability of the estimation of the technical condition of the units and mechanisms of the ICE. A mathematical model has been developed that takes into account the scroll frequency, gaps, and the phase of the pressure change process, which allows to obtain the dependencies of the pressure change in the combustion chamber. A certain pattern of pressure reduction at the end of the compression stroke with the increase of the wear value of cylinders, rings, and piston, which affects the technical condition of the cylinder-piston group, is revealed. The graphs of the dependencies between the considered modeling parameters are presented.

References

Dyachenko V. G. (2009). Theory of internal combustion engines: textbook. for universities. Kharkov: KHNADU, 340.

Ivanov R. V. (2010). Diagnosis of internal combustion engines by the parameter of the power of mechanical losses: abstract dis. Cand. tech. sciences. Volgograd, 40.

Zhdanovsky N. S. (2017). Thermodynamic analysis of compression end parameters at diesel start Power engineering. No. 8. 18-19.

Drobyshevsky Ch. V., Borovikov V. F., Fakhrutdinov A. G., Lazurko V. P. (2019). Evaluation of the thermodynamic parameters of the charge in starting conditions and the possibility of starting. Engine building. No. 11. 9-10.

Boldyrev I. V. (2014). Mathematical model of engine starting. Engine building. No. 6. 14-16.

Saraeva I. Yu. (2011). Investigation of the distribution law of a random value of compression. Automobile Transport. No. 29. 199-206.

Suranov G. I. (2012). Reduced wear on tractor engines during start-up. Moscow. Kolos, 143.

Ponizovsky A. Yu. (2010). Assessment of the technical condition of the cylinder-piston group of automotive diesel engines for various air flow rates at the inlet and outlet in the starting mode: abstract dis. Cand. tech. sciences. Novosibirsk, 111.

Pichugin A. I. (2011). Improving the efficiency of diagnosis of a cylinder-piston group of automobile engines by improving methods and means of recognizing its condition. Abstract. dis. Cand. tech. Sciences. Saratov State Agrarian University. N.I. Vavilova. Saratov. 23.

Rogovskii Ivan, Titova Liudmyla, Novitskii Andriy, Rebenko Victor. (2019). Research of vibroacoustic diagnostics of fuel system of engines of combine harvesters. Proceedings of 18th International Scientific Conference "Engineering for rural development". Jelgava, Latvia, May 22-25, Latvia University of Agriculture. Faculty of Engineering. Vol. 18, 291-298. https://doi.org/10.22616/ERDev2019.18.N451

Downloads

Published

2020-01-27

Issue

No. 10(3) (2019)

Section

Статті

License

Relationship between right holders and users shall be governed by the terms of the license Creative Commons  Attribution – non-commercial – Distribution On Same Conditions 4.0 international (CC BY-NC-SA 4.0):https://creativecommons.org/licenses/by-nc-sa/4.0/deed.uk

Authors who publish with this journal agree to the following terms:

  • Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
  • Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  • Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).