Optimisation of dynamic loads in elastic elements of load lifting cranes with different methods of lifting. Part II
DOI:
https://doi.org/10.31548/machenergy2019.04.005Keywords:
optimisation, dynamics, loading, ropes, load lifting cranes, methods of lifting, cargo.Abstract
During the work of lifting machinery there are considerable dynamic loads in the elements of the drive and the metal structure, which lead to the rapid failure of the elements of the structure and mechanisms and emergencies. The issue of elimination of dynamic loads has not been solved yet, so in this work, the dynamic loads in the elastic elements (ropes) of load lifting cranes have been optimized within various methods of cargo lifting: “pick-up”, “using weight”, “from the ground”. As a criterion for optimization (minimization of the specified loads) in the transient modes of operation of the crane (start, brake, reversal), the functional, which takes the minimum value and is the root mean square of the dynamic coefficient at the interval of time, corresponding to the duration of the transition, is proposed. Classical variational calculus methods were used to solve the problem of optimizing the mode of motion of the lifting mechanism. With these methods, the appropriate (optimal) modes (laws) of cargo movement and the electromechanical system of the drive mechanism of lifting are established.
The results obtained in this study can be further used to refine and improve existing engineering methods for calculating lifting mechanisms of the crane with flexible suspension both at the design / construction stages and under actual operating conditions.
References
Yvanchenko F. K., Bondarev V. S., Kolesnyk N. P., Barabanov V. Ya. (1978). Calculations of lifting and transporting machines. Kyev. Vyshcha shkola. 756.
Vainson A. A. (1970). Building cranes. Mashynostroenye.
Aleksandrov M. P. (1972). Hoisting machines. Vyshcha shkola.
Aleksandrov M. P. (1973). Hoisting machines. Vyshcha shkola.
Kazak S. A. (1968). The dynamics of overhead cranes. Mashynostroenye.
Komarov M. S. (1968). Dynamics of mechanisms and machines. Mashynostroenye.
Hokhberh M. M. (1969). Metal structures of hoisting machines. Mashynostroenye.
Bereznychenko Z. A. Klymchenkova N. V. Lahunenkov S. V. (2012). Development of rational control modes for the electromechanical system of an overhead crane. Bulletin of the Donbass State Engineering Academy. №4 (29). 6-11.
Herasymiak R. P. Leshchev A. A. (2008). Analysis and synthesis of crane electromechanical systems. Odessa. SMYL. 192.
Aleksandrov M. P. (1986). Crane Dynamics. 400.
Blekhman Y. Y. Myshkys A. D. Panovko Ya. H. (1983). Mechanics and Applied Mathematics: Logic and Features of Mathematics Applications. Nauka. 328.
Vyhodskyi M. Ya. (2006). Handbook of Higher Mathematics. AST. Astrel. 991.
Husak A. A. Husak H. M. Brychykova E. A. (1999). Handbook of Higher Mathematics. Mynsk. TetraSystems. 640.
Bronshtein Y. N. Semendeev K. A. (1986). Math Reference for Engineers and Students VTUzov. Nauka. 544 p.
Klymchenkova N. V. Kornyenko S. V. (2008). Increasing the degree of automation of the technological process of moving cargo by cranes. East European Journal of Advanced Technology. Kharkov. Tekhnolohycheskyi Tsentr. №41. 41-44. https://doi.org/10.1016/S1097-8690(08)70873-4
Klimchenkova N. V. Spaska A. M. (2007). Method of vertical movement of cargo by crane. Patent of Ukraine for useful model В 66719/00. №27558. №u200705695; declared. 23.05.07; published. 12.11.2007, №18.
Loveikin V. S. Romasevych Yu. O. (2016). Dynamics and optimization of modes of movement of bridge cranes. Monograph. Kyiv. TsP «KOMPRINT». 314.
Loveikin, V. S., Pylypaka, S. F., Kadykalo, I. O. (2017). Dynamic analysis of the mechanism of rotation of the jib crane. Scientific Herald of National University of Life and Enviromental Science of Ukraine. Series: Technique and energy of APK. Kyiv. Vol. 258. P. 192-202.
Loveikin, V. S., Chovnyuk, Yu. V., Kadykalo, I. O. (2017). Optimization of modes of movement of rotating mechanism of cranes. Scientific Herald of National University of Life and Enviromental Science of Ukraine. Series: Technique and energy of APK. Kyiv. Vol. 262. 177-190.
Loveikin, V. S., Chovnyuk, Yu. V., Kadykalo, I. O. (2016). Analysis of conditions of existence of stationary modes (self-oscillations) during operation of bridge cranes. Hebezeuge und Furdermitte. Odesa. Vol. 3. 4-15.
Loveikin, V. S., Chovnyuk, Yu. V., Kadykalo, I. O. (2016). Dynamic optimization of hoisting mechanisms of cranes when lifting cargo "with pickup". DGMA Scientific Bulletin. Vol. 2(20E). 90-98.
Loveikin, V. S., Chovnyuk, Yu. V., Kadykalo, I. O. (2016). Updated analysis and minimization of dynamic loads in elastic elements of lifting equipment. Bulletin of PNRPU. Geology. Oil & Gas Engineering & Mining. Vol.15. №21. 354-361. https://doi.org/10.15593/2224-9923/2016.21.7
Loveikin V. S. Chovniuk Yu. V. Dikteruk M. H. Pastushenko S. I. (2004). Modeling of dynamics of mechanisms of load-lifting machines. Monograph. Kyiv. Nats. Un-T Bud-Va I Arkhit. Mykolaiv. Derzh. Ahrar. Un-T. K. Mykolaiv. RVV MDAU. 288.
Grigorov, O. V., Petrenko, N. O. (2006). Hoisting machines: navch. posibnik. NTU "HPI". 304.
Stanišić, M. M. (1985). On a new theory of the dynamic behavior of the structures carrying moving masses. Ingenieur-Archiv. 55(3). 176-185. https://doi.org/10.1007/BF00536412
Tanizumi, K., Hino, J., Yoshimura, T., & Sakai, T. (1994). Modelling of Dynamic Behavior and Control of Truck Cranes. (Modelling of Dynamic Behavior of Truck Cranes with Hydraulic System in Swing Operation). Transactions of the Japan Society of Mechanical Engineers Series C. 60(572). 1262-1269. https://doi.org/10.1299/kikaic.60.1262
Lee, H. P. (1996). Dynamic response of a beam with a moving mass. Journal of Sound and Vibration. 191(2). 289-294.
https://doi.org/10.1006/jsvi.1996.0122
Oguamanam, D. C. D., Hansen, J. S., & Heppler, G.R. (2001). Dynamics of a three-dimensional overhead crane system. Journal of Sound and Vibration. 242(3). 411-426. https://doi.org/10.1006/jsvi.2000.3375
Sun, G., & Kleeberger, M. (2003). Dynamic responses of hydraulic mobile crane with consideration of the drive system. Mechanism and Machine Theory. 38(12). 1489-1508.
https://doi.org/10.1016/S0094-114X(03)00099-5
Campara, T., Bukvic, H., Sprecic, D. (2009). Ability to Control Swinging of Payload during the Movement of the Rotary Cranes Mechanism. 4th International Conference on Intelligent Technologies in Logistics and Mechatronics Systems. Kaunas Univ Technol Panevezys Inst. Kaunas. LITHUANIA. 52-55.
Downloads
Published
Issue
Section
License
Relationship between right holders and users shall be governed by the terms of the license Creative Commons Attribution – non-commercial – Distribution On Same Conditions 4.0 international (CC BY-NC-SA 4.0):https://creativecommons.org/licenses/by-nc-sa/4.0/deed.uk
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
