Mathematical model of moving particle by vertical screw in stationary mode

Authors

DOI:

https://doi.org/10.31548/machenergy2019.04.057

Keywords:

relative motion, vertical auger, particle, angular velocity of rotation, cylindrical shell, differential equations, kinematic parameters.

Abstract

Equations for the relative motion of a particle along the periphery of a vertical screw are constructed, which rotates about its axis and is limited by a coaxial fixed cylinder. The equations are solved by numerical methods. Separately, the force of friction of the particle on the surface of the screw and the surface of the cylindrical housing is taken into account. The angular velocity of sliding of a particle along the surface of the screw is found. A graph was constructed to find the effective mode of particle transportation. A separate case is also considered when the screw is stationary and the particle descends on it under the action of the force of its own weight, as is the case with screw descents. The graphs of the kinematic characteristics of the functions of time are given.

References

Vasilenko, P. M. (1960). Theory of the motion of particles on rough surfaces agricultural machines. Kiev. 283 p.

Zaika, P. M. (1992). Special problems in agricultural mechanics. Kiev. 507 p.

Sysoev, N. S. (1949). Theoretical basis and calculation sorting "Snake". A farm machine. No 8. P. 5-8.

Voytyuk, D. G., Pilipaka, S. F. (2002). Finding the trajectory of motion of material particle in gravitational ruled surfaces with horizontal creative. Mechanization of agricultural production. Kiev. Volume 12. P. 58-69.

Nevidomy, A. V., Pylypaka, S. F. (2012). Research of movement of a material particle on a rough fixed surface coned screw with a vertical axis. Labor Taurian State Agrotechnological University. Melitopol. THATO. Vol. 4. Volume 53. P. 123-129.

Linnik, M. K., Voytyuk, D. G., Pylypaka, S. F. (2006). Research of movement of the material particles on the surface of the oblique helicoid under the force of its own weight. Technique APK. No 12. P. 17-22.

Pylypaka, S. F., Clendy, N. B. (2015). The particle motion on the internal rough surface of a rotating cone with vertical axis. MOTROL. Commission of motorization and energetics in agriculture. Lublin-Preszow. Vol. 17. No 3. P. 73-83.

Linnik, M. K., Voytyuk, D. G., Pylypaka, S. F. (2008). Research of movement of the material particles on the inner surface of a vertical cylinder, which performs a planetary motion. Mechanization and electrification of agriculture. Glevaha. Vol. 92. P. 49-62.

Anikin, N. F., Ivanov, V. D., Pevzner, L. M. (1970). Screw separator for ore concentration. Moscow. Nedra, 184.

Downloads

Published

2020-01-30

Issue

No. 10(4) (2019)

Section

Статті

License

Relationship between right holders and users shall be governed by the terms of the license Creative Commons  Attribution – non-commercial – Distribution On Same Conditions 4.0 international (CC BY-NC-SA 4.0):https://creativecommons.org/licenses/by-nc-sa/4.0/deed.uk

Authors who publish with this journal agree to the following terms:

  • Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
  • Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  • Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).