Research of advanced crusher wood biomass for solid fuel production
DOI:
https://doi.org/10.31548/machenergy2020.01.105Keywords:
processes of grinding, wood biomass, solid biofuels, working bodies, crusher sieveless, calculations, parameters.Abstract
The work deals with the crushing of recycled wood biomass for the production of pellets or briquettes to justify structurally-technological scheme and parameters of perspective crusher. The identified prospects solid biofuel production in terms of economy Analysis processes and designs devices for crushing biomass. Your rational type Hammer crusher without reshitnoyi for use in industrial complexes economy.
Analytical studies demonstrated the feasibility of ram hammer crusher sieveless DMB-F (0.5-1.5) for crushing to pressing wood biomass in fuel products. The functional scheme of technical means, carried out engineering calculations modes and parameters of the crusher. The obtained results show the efficiency of the process of crushing raw wood at that mill.
References
Polishchuk, V., Naumenko, V, Naumenko, O. (2018). Justification of capacity of the pellets granulation line at private enterprise "Malyn furniture factory". Teka commission of motorization and power industry in agriculture. 18(1). 7-16.
Golovkov, S. I., Koperin, I. F., Naydenov, B. F. (1987). Energeticheskoe ispolzovanie drevesnyh othodov [Energy use of wood waste]. Moscow: Forest Industry, 224.
Naydenov, B. F. (1971). Volumetric weights and specific volumes of goods: reference book. Moscow: Transport. 160.
Geletukha, G. (2015). Preparation and implementation of natural gas biomass substitution projects for the production of heat energy in Ukraine. Kyiv: Polygraph Plus. 72.
Collection of methods for calculating waste generation volumes. St. Petersburg: CECEC. 77.
Complex RK 847. ARIESUS UKRAINE. Available at: http://arjes.com.ua/production/kompleks-rk-847.html.
RM 41 chipper. ARIESUS UKRAINE. Available at: http://arjes.com.ua/production/rubalna-mashyna-rm-41.html.
Sieve drum for sieving, calibration of different factions. all.biz. Available at: https://ua.all.biz/sito-barabanne-dlya-prosyuvannya-shchepi-g15731079.
Hammer crushers RM 71. ARIESUS UKRAINE. Available at: http://arjes.com.ua/production/molotkovyj-podribnjuvach-rm-71.html.
Dubrovin, V. O., Polishchuk, V. M., Tarasenko, S. E., Dragnev, S. V. (2013). Workshop on machinery and equipment for bioenergy. Kyiv. Agrar Media Group. 208.
Polishchuk, V. M., Dubrovin, V. O., Dragnev, S. V. (2013). Engineering systems of nature management. Part 2. Structural and technological calculation of granulator with a round matrix for the production of granulated biofuels: methodical instructions for the implementation of laboratory works. 48.
Polishchuk, V. M., Tarasenko, S. E. (2017). Biofuels. Production and use. 376.
Polishchuk, V. M., Tarasenko, S. E. (2016). Machines and equipment of bioenergy. Part 2. Structural and technological calculation of granulator with a round matrix in the line of production of fuel pellets: methodical instructions for the implementation of laboratory works. 34.
Downloads
Published
Issue
Section
License
Relationship between right holders and users shall be governed by the terms of the license Creative Commons Attribution – non-commercial – Distribution On Same Conditions 4.0 international (CC BY-NC-SA 4.0):https://creativecommons.org/licenses/by-nc-sa/4.0/deed.uk
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).