Методика визначення лужності біодизеля
Abstract
Наведена методика потенціометричного титрування, адаптована до визначення лужності біодизеля. Розглянуті технічні засоби для проведення потенціометричного титрування біодизеляReferences
Дубровін В.О. Технічні засоби для виробництва біодизеля / В.О. Дубровін, В.Г. Мироненко, В.М. Поліщук, А.І. Мороз // Науковий вісник Національного університету біоресурсів і природокористування. – К., 2011. – Вип. 166, ч. 2. – С. 67–72.
Поліщук В.М. Застосування біопалив для дизельних двигунів / В.М. Поліщук, С.В. Драгнєв, І.І. Убоженко, М.Ю. Павленко, О.В. Поліщук // Науковий вісник Національного аграрного університету. – К., 2008. – Вип. 125. – С. 315–319.
EN 14214:2012: Liquid petroleum products - Fatty acid methyl esters (FAME) for use in diesel engines and heating applications - Requirements and test methods – [Valid from 2012-08-29]. – Catalogue on-line №9, 2012. – 20 p. – (European standard).
Ефіри метилові жирних кислот олій і жирів для дизельних двигунів. Технічні вимоги: ДСТУ 6081:2009. – [Дійсний від 2009-01-20]. – К.: Держспоживстандарт України, 2009. – 12 с. – (Національний стандарт України).
ASTM D 6751-02 Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels.
Biodiesel Standards/ [Електронний ресурс] / Biodiesel-fuel.co.uk. 12/11/2012 // Режим доступу до журн.: http://www.biodiesel-fuel.co.uk/biodiesel-standards/612.
ГОСТ 11362-96: Нефтепродукты и смазочные материалы. Число нейтрализации. Метод потенциометрического титрования. – [Действителен от 1996-06-01]. – М.: Стандартинформ. – 18 с. – (Межгосударственный стандарт).
Downloads
Issue
Section
License
Relationship between right holders and users shall be governed by the terms of the license Creative Commons Attribution – non-commercial – Distribution On Same Conditions 4.0 international (CC BY-NC-SA 4.0):https://creativecommons.org/licenses/by-nc-sa/4.0/deed.uk
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).