BALANCE OF POWER CLINDAMICINA BRUSH IN INTERACTION WITH SOIL

Authors

  • A. V. Voyik ,
  • V. V. Kravchenko
  • O. S. Pushka

Abstract

This paper considers the balance of power of cylindrical brush with vertical axis of rotation during the disclosure of the mother plants root system. Analyzed two variants of brushes with different ways of placing the pile on the surface – singly or in bunches. Determined the efficiency of brushes according to the way of pile placement. It is established that the power during work of the brush is spent on the brush friction, pile deformation, separation of the soil particles and their rejection. The graphic analysis of both components and the overall value of power, required to drive the brush, is made, considering the options of pile placement on the brush surface and kinematic parameters of their work - the speed of the unit and the circular speed of the brush, which also depends on the way of pile placement. The analysis of balance of the power according to the soil type is done as well, especially its density, which covers the root system of mother plants.

References

Fryshev, S. H. (1999). Obgruntuvannya i rozrobka tekhnolohichnoho kompleksu mashyn dlya vyroshchuvannya sadyvnoho materialu plodovykh kul'tur [Rationale and development of the technological complex of machines for cultivation of a landing material of fruit crops]. Dys. d-ra tekhn. nauk: 05.20.01 / Natsional'nyy ahrarnyy un-t. K., 287.

Husev, L. M. (1968). Yssledovanyya raboty shchetochnykh ustroystv s tsylyndrycheskymy shchetkamy podmetal'no-uborochnykh mashyn [Research work of the brush device cylindrical brush sweeper, sweepers]. L.: MKKh RSFSR, 71.

Karaban, H. A., Balovnev, V. Y., Zasov, Y. A. (1975). Mashyny dlya soderzhanyya y remonta avtomobyl'nykh doroh y aэrodromov [Machine for maintenance and repair of roads and airfields]. M.: Mashynostroenye, 368.

Bukovets, O. Y. (1976). Nekotorye kynematycheskye zavysymosty puchkovykh shchetok [Some of the kinematic dependences of beam brushes]. Nauch. tr. AKKh ym. Pamfylova. M., Vyp. 129, 52–55.

Vorzonyn, V. A. (1978). Yssledovanye protsessa pnevmatycheskoy uborky frezernoho torfa s prymenenyem shchetochnoho aktyvatora [The study of the process of pneumatic cleaning milling peat with the use of the brush activator]. Avtoref. dyss… kand. tekhn. nauk. Kalynyn, 25.

Mykhaylov, A. V. (1994). Shchetochnye torfyanye mashyny [Brush peat machines]. Sb. nauch.tr. SPb.: Yzd. VNYYTP, Vyp. 71, 170.

Ermylov, A. B. (1988). Raschеt y proektyrovanye mashyn dlya letneho soderzhanyya doroh [Calculation and design of cars for summer road maintenance]. M.: Yzd-vo MADY, 87.

Downloads

Published

2016-12-28

Issue

No. 251 (2016)

Section

Статті

License

Relationship between right holders and users shall be governed by the terms of the license Creative Commons  Attribution – non-commercial – Distribution On Same Conditions 4.0 international (CC BY-NC-SA 4.0):https://creativecommons.org/licenses/by-nc-sa/4.0/deed.uk

Authors who publish with this journal agree to the following terms:

  • Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
  • Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  • Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).