EVALUATION OF THE FEASIBILITY OF APPLYING RUBBER COATING ON DAIRY FARMS

Authors

  • N. I. Boltyanskaya ,
  • O. V. Boltyanskii

Abstract

The paper discusses the advantages and disadvantages of using different materials for decorating the aisles in barns and advisability of using rubber coating for passages in the cattle farms. Livestock on a solid concrete floor provokes a lot of diseases of limbs and joints of animals, so the feasibility of applying rubber coating for passages in the cattle farms are obvious.

The main criteria that should guide you during the selection is the surface material, which is non-slip and elastic qualities and the ability to recover quickly. In addition, the surface of the material to be pressed through under the hoof of the animal to a depth of at least 3 mm.

The material should also have warranty for at least 5 years and to withstand the pressure of the scraper. If cleaning is carried out by the tractor, it should be clarified how much weight can withstand the specific coating, and to compare it with the weight of the harvesting machine. Besides the bucket of the tractor should protect the bottom rubber pads so as not to break coating does not pull out attachment while cleaning.

References

Boltyans'ka, N. I. (2012). Puty razvytyya otrasly svynovodstva y povyshenye konkurentosposobnosty ee produktsyy [The development of the pig industry and the competitiveness of its products]. Motrol: Motoryzacja i Energetyka Rolnictwa, 2012, Vol. 14, 3b, 164–175.

Kozhamuratov, N. Zh. (2009). Еffektyvnost' proyzvodstva produktsyy y snyzhenye trudovykh zatrat v zhyvotnovodstve [The efficiency of production and reduce labor costs in farming]. Agricultural science, 11, 20–22.

Smolyar, V. (2011). Natsional'nyy proekt «Vidrodzhene skotarstvo» i vazheli yoho realizatsiyi: konkretni rishennya kolehiyi Minahropolityky Ukrayiny [The national project "Revived cattle breeding" and the instruments for its implementation: a specific decision of the Collegium of the Ministry of agrarian policy of Ukraine]. Engineering and technology AIC, 2011, 10, 4–5.

Holub, H. A., Kukharets', S. M. (2015). Efektyvnist' funktsionuvannya bahatoprofil'noho sil's'kohospodars'koho pidpryyemstva [The efficiency of a diversified agricultural enterprise]. Scientific Bulletin of National University of Life and Environmental Sciences of Ukraine. Series: machinery and energetics AIC. K.,

Vyp. 212, ch. 2, 35–44.

Adamchuk, V. V., Fenenko, A. І. (2014). Etapy razvytyya mekhanyzyrovannoho proyzvodstva moloka y hovyadyny v Ukrayne [The stages of development of the mechanized production of milk and beef in Ukraine]. Molochnoe delo, 2, 13–16.

Adamchuk, V. V., Fenenko, A. І. (2010). Kontseptual'nye aspekty razvytyya ferm po proyzvodstvu moloka [Conceptual aspects of development of farms for production of milk]. Milk, 12, 14–17.

Sklyar, O. H., Boltyans'ka, N. I. (2012). Mekhanizatsiya tekhnolohichnykh protsesiv u tvarynnytstvi [Mechanization of technological processes in animal husbandry]. Melitopol': Kolor Prynt, 720.

Downloads

Published

2016-12-28

Issue

No. 251 (2016)

Section

Статті

License

Relationship between right holders and users shall be governed by the terms of the license Creative Commons  Attribution – non-commercial – Distribution On Same Conditions 4.0 international (CC BY-NC-SA 4.0):https://creativecommons.org/licenses/by-nc-sa/4.0/deed.uk

Authors who publish with this journal agree to the following terms:

  • Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
  • Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  • Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).