THEORETICAL ANALYSIS OF STRUCTURAL AND KINEMATICS PARAMETERS OF COB-PEELING DEVICE FOR VEHICLE OF CORN-GATHERING COMBINE
Abstract
The thesis is devoted to improving the universality and effectiveness of the maize technology by developing technological module, which can be used for corn for grain and seed and sweet corn.
In carrying out the thesis promoted Patent Information Search, studied literature on the problems of mechanized corn harvesting.
Comparative multicriteria analysis of existing domestic and foreign technology and existing functional schemes of different variants of layout corn equipment installed feasibility of developing a new cob-separating device device process module adapted to modern conditions of harvesting, as well as the possibility of its use for corn for grain, seed and sweet corn.
The analysis of the various designs cleaning technique developed classification scheme cobs devices for separation, which can reveal features of the implementation process for each generation devices, traffic patterns set corn plant components and identify the main advantages and disadvantages of each of the structures.
In theoretical analysis of mathematical models of different ways of separating heads from the stems (tensile, impact, fracture, torsion) A new set of features and patterns of nature destruction stalk, and also the efforts resulting in the intersection of the stem with all types of loads.
Based on experimental studies proved rational structural and kinematic parameters of the proposed module. Thresholds established four main structural and technological factors that are crucial for the proposed process module.
Production tests proved the effectiveness and efficiency of its work.References
Ahropromyslovyy kompleks Ukrayiny: stan, tendentsiyi ta perspektyvy rozvytku. Informatsiyno-analitychnyy zbirnyk (2000). Vyp. 5 / Za red. P. T. Sabluka ta in. K.: IAE UAAN, 647.
Khaylis, H. A., Fedorus', Yu. V. (2004). Mekhanika roslynnykh materialiv. Luts'k: Red.-vyd. viddil LDTU, 302.
Trubylyn, E. Y., Kravchenko, B. C., Severyn, Yu. D., Kurasov, B. C., Myronov, V. A. (2000). Mashyny dlya uborky y posleuborochnoy obrabotky kukuruzy. Krasnodar, KubHAU, 35.
Patent 7062896 USA, МКU3 А 01 D 45/02. Gathering and picking device having curved picking gam / A. Resing, R. Wuebbels.
Patent 7062897 USA, МКU3 А 01 D 45/02. Gathering and picking device /
C. Rickert, D. Bongert.
Downloads
Published
Issue
Section
License
Relationship between right holders and users shall be governed by the terms of the license Creative Commons Attribution – non-commercial – Distribution On Same Conditions 4.0 international (CC BY-NC-SA 4.0):https://creativecommons.org/licenses/by-nc-sa/4.0/deed.uk
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).