SUBSTANTIATION OF CONSTRUCTIVE-KINEMATIC PARAMETRES OF SCREW CONVEYOR HICKSVILLE MODULE

Authors

  • I. M. Storozhuk ,

Abstract

The solving of the actual problem such as improve technological performance ofmachines for harvesting root crops of fodder beet by improving module for harvesting haulm and reasoning of screw conveyors parameters are given. Mathematical model is designed and based on the analysis of theoretical research of technological process harvesting haulm by module for harvesting haulm. This model characterizes interconnection between estimated performance screw conveyor and seconds filing of chopped plant remains by rotary cutter for root crop tops. Limits of change of angular velocity and diameter of the screw conveyor with conditions of providing the estimated performance of module for harvesting haulm are determined.An empirical model in the form of regression equation which functionally describes change of screw conveyor performance depending on process parameters is obtained.

References

Baranovs'kyy, V. M. (2006). Osnovni etapy ta zahal'ni pryntsypy suchasnykh tendentsiy rozvytku korenezbyral'nykh mashyn [The main stages and the General principles of modern trends in the development kienesberger machines]. Naukovyy zhurnal. Visnyk TDTU. Ternopil', T. 11, 2, 67–75.

Hychkozbyral'na mashyna [Hicksville machine]. Deklaratsiynyy patent Ukrayiny na korysnu model' MPK A01D 23/02 Pat. № 101470 / Storozhuk I. M., Baranovs'kyy V. M., Teslyuk V. V., Onyshchenko V. B., Pan'kiv M. R. ; zayavnyk i vlasnyk Natsional'nyy universytet bioresursiv i pryrodokorystuvannya Ukrayiny. № u201503283 ; zayavl. 07.04.2015 ; opubl. 10.09.2015. Byul. № 17.

Hychkozbyral'na mashyna [Hicksville machine]. Deklaratsiynyy patent Ukrayiny na korysnu model' MPK A01D 23/02 Pat. № 101470 / Storozhuk I. M., Baranovs'kyy V. M., Teslyuk V. V., Onyshchenko V. B., Pan'kiv M. R. ; zayavnyk i vlasnyk Natsional'nyy universytet bioresursiv i pryrodokorystuvannya Ukrayiny. № u201503283 ; zayavl. 07.04.2015 ; opubl. 10.09.2015. Byul. № 17.

Kornev, H. V. (1961). Transportery y elevatory sel'skokhozyaystvennoho naznachenyya [Conveyors and elevators for agricultural purposes]. M., 176.

Hevko, B. M., Danyl'chenko, M. H., Rohatyns'kyy, R. M. (1992). Mekhanizmy z hvyntovymy prystroyamy [Mechanisms with screw devices]. L'viv: Svit, 380.

Hryhor'ev, A. M. (1981). Vyntovye konveyery [Screw conveyors]. M.: Mashynostroenye, 635.

Onyshchenko, V. B., Storozhuk, I. M. (2016). Rozrakhunkova produktyvnist' shnekovoho konveyera hychkozbyral'noho modulya [Design capacity of a screw conveyor Hicksville module]. Scientific journal. Innovative solutions in modern science, Dubai, № 1(1), 154–164.

Baranovs'kyy, V. M., Pidhurs'kyy, M. I., Pan'kiv, M. R. (2014). Metodolohichni ta konstruktyvno-tekhnolohichni aspekty rozrobky adaptovanykh korenezbyral'nykh mashyn [Methodological design capacity of a screw conveyor module]. Naukovyy zhurnal. Visnyk TNTU. Ternopil', T. 2 (74), 106–113.

Hevko, B. M. (1987). Nauchnye osnovy razrabotky vyntovykh transporty-ruyushchykh mekhanyzmov sel'skokhozyaystvennykh mashyn [Scientific bases of development of screw conveying mechanisms of agricultural machines] : avtoref. dys… doktora tekhn. nauk : spets. 05.20.01 “Mekhanyzatsyya sel'skokhozyay-stvennoho proyzvodstva”. Rostov-na-Donu, 37.

Bosoy, E. S., Vernyaev, O. V., Smyrnov, A. S. (1978). Teoryya, konstruktsyya y raschet sel'khozmashyn [Theory, design and calculation of agricultural machines]. M.: Mashynostroenye, 567.

Downloads

Published

2016-12-28

Issue

No. 251 (2016)

Section

Статті

License

Relationship between right holders and users shall be governed by the terms of the license Creative Commons  Attribution – non-commercial – Distribution On Same Conditions 4.0 international (CC BY-NC-SA 4.0):https://creativecommons.org/licenses/by-nc-sa/4.0/deed.uk

Authors who publish with this journal agree to the following terms:

  • Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
  • Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  • Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).