ANALYSIS OF EXPLOITATION-TECHNOLOGICAL RELIABILITY OF COMBINE HARVESTERS
Abstract
In the process of operation of combine harvesters, the main criterion of effective use is maximum productivity at the lowest cost of living and materialized labor with the measures compliance with agro-technological quality of the process and requirements of labor protection and the impact on the environment. Therefore, one of the most effective ways of ensuring maximum performance of the combine harvester is its operational and technological reliability.
To establish the analytical relationship between the performance of combine harvester and its operational and technological reliability, as a complex technical system with a predetermined quality, it is necessary to apply the general theory of reliability and performance that with a high degree of reliability can apply are identified in the production processes.References
Bystryy, O. M., Rohovs'kyy, I. L. (2011). Dostovirnist' kontrolyu parametriv tekhnichnoho stanu sil's'kohospodars'kykh mashyn [The accuracy of the control parameters of the technical condition of agricultural machinery]. Scientific Bulletin of National University of Life and Environmental Sciences of Ukraine. Series: Machinery and Energetics AIC. K., Vyp. 166, ch. 1, 93–99.
Bystryy, O. M., Rohovs'kyy, I. L. (2011). Metodyka vyznachennya resursu za dynamikoyu znoshuvannya detaley zernozbyral'nykh kombayniv [The method of determining the resource dynamics of wear of combine harvesters]. Labor Tavria State Agrotechnical University. Melitopol', Vyp. 11, t. 1, 171–176.
Bystryy, O. M., Rohovs'kyy, I. L. (2014). Kil'kisni pokaznyky dlya otsinky ekspluatatsiyno-tekhnolohichnoyi bezvidmovnosti zernozbyral'nykh kombayniv [Quantitative indicators for assessing operational and technological reliability of combine harvesters]. Scientific Bulletin of National University of Life and Environmental Sciences of Ukraine. Series: Machinery and Energetics AIC. K.,
Vyp. 196, ch. 3, 182–189.
Bystryy, O. M., Rohovs'kyy, I. L. (2016). Dopustyme i hranychne znoshennya detaley zernozbyral'nykh kombayniv [Valid and limit the wear of these parts combine harvesters]. Zbirnyk tez dopovidey XI Mizhnarodnoyi naukovo-praktychnoyi konferentsiyi «Obukhivs'ki chytannya» (1 bereznya 2016 roku) / Natsional'nyy universytet bioresursiv i pryrodokorystuvannya Ukrayiny. K., 71–73.
Bystryy, O. M., Rohovs'kyy, I. L. (2016). Analitychnist' tekhnichnoho kontrolyu bezvidmovnosti zernozbyral'noho kombayna [Analyticity of technical control of reliability of combine harvester]. Zbirnyk tez dopovidey XII Mizhnarodnoyi naukovoyi konferentsiyi «Ratsional'ne vykorystannya enerhiyi v tekhnitsi» (17-20 travnya 2016 roku) / Natsional'nyy universytet bioresursiv i pryrodokorystuvannya Ukrayiny. K., 73–77.
Aleksandr, Bystryy. Ivan, Rohovskyy. (2013). Opredelenye ratsyonal'noho kolychestva tekhnycheskoho kontrolya mekhanyzmov zernouborochnoho kombayna [The definition of rational number technical control mechanisms combine harvester]. Motrol: Motorization and power industry in agriculture. Tom 15, 3, 313–319.
Aleksandr, Bystryy. Ivan, Rohovskyy. (2014). Analytycheskye modely эkspluatatsyonno-tekhnolohycheskoy bezotkaznosty zernouborochnykh kombaynov [Analytical model of operational and technological reliability of combine harvesters]. Motrol: Motorization and power industry in agriculture. Tom 16, 3, 332–338.
Downloads
Published
Issue
Section
License
Relationship between right holders and users shall be governed by the terms of the license Creative Commons Attribution – non-commercial – Distribution On Same Conditions 4.0 international (CC BY-NC-SA 4.0):https://creativecommons.org/licenses/by-nc-sa/4.0/deed.uk
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
