Виготовлення гвинтових гофрованих заготовок на універсальному контрольно-обкатному верстаті 5А725

Authors

  • А. П. Драган

Abstract

MAKING SPIRAL CORRUGATED BLANKS ON UNIVERSAL MACHINE 5A725

A. Dragan

 

One of the preconditions for overcoming the crisis in the national economy is the further development of mechanical engineering, which contributes to productivity, increase production efficiency, improve product quality, and requires a fundamentally new approach to creating and using highly efficient resource-saving technologies.

Despite the considerable number of scientific works that focus on the production of spiral corrugated blanks, the level of technological support in our country and abroad is not high enough, and the scientific basis for its creation does not always meet modern requirements for the material and energy consumption.

Issues related to the process of forming the screw blanks are devoted to some authors, but especially forming spiral corrugated blanks are considered sufficient.

The purpose of the study is to develop recommendations for an effective process of forming helical corrugated blanks on the universal machine  5A725, which would ensure accuracy, efficiency and increased productivity.

References

Пилипець М. І. Науково-технологічні основи виробництва навивних заготовок деталей машин : автореф. дис. на здобуття наук. ступеня д-ра техн. наук : спец. 05.02.08 «Технологія машинобудування» / М. І. Пилипець. – Тернопіль, 2002. – 40 с.

Гевко Б. М. Технологические основы выбора конструктивных параметров шнеков / Б. М. Гевко // ?зв. вузов. Машиностроение, 1982. – № 5. – С. 148–151.

Ляшук О. Л. Технологічне забезпечення виготовлення деталей типу “тіл обертання” з профільного прокату : автореф. дис. на здобуття наук. ступеня канд. техн. наук : спец. 05.02.08 «Технологія машинобудування» / О. Л. Ляшук. – Тернопіль, 2006. – 20 с.

Драган А. П. Обґрунтування параметрів технологічного процесу виготовлення гвинтових гофрованих заготовок / А. П. Драган, А. Є. Дячун // Зб. наукових праць ВДАУ. – Вип. 25. – Вінниця : ВДАУ, 2006. – С. 187–194.

Downloads

Published

2017-02-16

Issue

No. 240 (2016)

Section

Статті

License

Relationship between right holders and users shall be governed by the terms of the license Creative Commons  Attribution – non-commercial – Distribution On Same Conditions 4.0 international (CC BY-NC-SA 4.0):https://creativecommons.org/licenses/by-nc-sa/4.0/deed.uk

Authors who publish with this journal agree to the following terms:

  • Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
  • Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  • Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).