Дослідження надійності прес-гранулятора за законами розподілу ресурсу

Автор(и)

DOI:

https://doi.org/10.31548/machenergy2019.03.079

Ключові слова:

надійність, прес-гранулятор. запасні частини, параметри розподілу, час прогнозу, середній ресурс.

Анотація

Сьогодні спостерігається старіння машинно-тракторного парку в тваринництві та особливо гостро стає проблема ефективного використання вітчизняної і зарубіжної техніки. Особливо велика увага приділяється проблемі підвищення якості та надійності розроблюваних вітчизняних машин і устаткування. Вимоги до техніки безперервно зростають як до якості, так і діапазону виконання сільськогосподарських робіт і операцій, підвищення надійності і продуктивності. Особливість функціонального призначення та експлуатації засобів механізації у тваринництві полягає у забезпеченні безперервності біотехнічного зв’язку: оператор — машина — тварина — навколишнє середо-вище. Це є можливим лише за умов постійного підтримання вказаних засобів у працездатному стані, за якого коефіцієнт готовності кожної одиниці повинен бути на рівні 0,95–0,98. У теорії надійності відомо декілька десятків розподілів, за допомогою яких можливо описувати експериментальні дані відмов. Розглядаючи різні моделі відмов виділено ряд розподілів: нормальний, логарифмічно нормальний, Вейбулла, гамма та експоненціальний, які є основою побудови моделей довговічності невідновлених виробів тваринницької техніки, замінених у разі відмови запасними. Перелічені розподіли охоплюють відповідно поступові, зносові, утомлені та раптові відмови механічних систем, складних систем, що пройшли період припрацювання, а також систем, які експлуатуються в тяжких умовах під впли-вом механічних і кліматичних навантажень

Посилання

Sklar O. G., Boltyanska N. I. (2012). Mechanization of technological processes in animal husbandry: textbook. manual. Color Print. 720.

Rogovsky I. L. (2010). Technical Requirements for Agricultural Machinery Warranty Maintenance. Scientific Herald of National University of Life and Environmental Science of Ukraine. Series: technique and energy of APK. Kyiv, Ukraine. Vol. 166, Part 1. 286-291.

Boltyanska N. I. (2008). The current state of the machine-tractor fleet of enterprises in the agro-industrial complex. Proceedings of the Tavrida State Agrotechnological University. No 36, 3-7.

Sklar O. G., Boltyanska N. I. (2018). Fundamentals of Livestock Enterprise Design: A Textbook. Condor Publishing House, 380.

https://doi.org/10.4324/9781315576619-24

Boltyansky O. V. (2014). Analysis of ways of increasing the efficiency of the use of the machine-tractor park. Against TDAT. No 14. Vol. 4. 204-209.

Rogovsky I. L. (2015). Restoration of capacity of assembly units of agricultural machinery. Bulletin of Kharkiv National Technical University of Agriculture named after Petro Vasilenko. Vol. 159. 224.

Komar A. S., Boltyanska N. I. (2019). Processing of poultry manure for fertilization by granulation. Abstracts of the 5th International Scientific and Practical Conference "Innovative Technologies for Growing, Storage and Processing of Horticulture and Crop Production". Uman. 18-20.

Boltyanska N. I. (2014). Quality assurance of products in the field of agricultural engineering. Scientific Herald of National University of Life and Environmental Science of Ukraine. Series: technique and energy of APK. Kyiv, Ukraine. Vol. 196, Part 1. 239-245.

Rogovskii Ivan, Titova Liudmyla, Novitskii Andriy, Rebenko Victor. (2019). Research of vibroacoustic diagnostics of fuel system of engines of combine harvesters. Proceedings of 18th International Scientific Conference "Engineering for rural development". Jelgava, Latvia, May 22-25, Latvia University of Agriculture. Faculty of Engineering. Vol. 18, 291-298. https://doi.org/10.22616/ERDev2019.18.N451

Boltyanska N. I. (2013). The role of technical service in ensuring the highly efficient functioning of the process of production of livestock products. TDATU Scientific Bulletin. Melitopol, Vol. 3. Vol. 1, 103-110.

Rogovskii I. L. (2017). Conceptual framework of management system of failures of agricultural machinery. Scientific Herald of National University of Life and Environmental Science of Ukraine. Series: technique and energy of APK. Kyiv, Ukraine. Vol. 262. 403-411.

Boltyanska N. I., Komar A. S. (2019). Development of the design of a press-granulator for the processing of bird manure. Coll. scientific works Intern. Research Practice Conf. "Topical issues of development of agrarian science in Ukraine". Nizhin, 84-91.

Boltyanska N. (2018). Ways to Improve Structures Gear Pelleting Presses. TEKA. An International Quarterly Journal on Motorization, Vehicle Operation, Energy Efficiency and Mechanical Engineering. Lublin-Rzeszow, Vol. 18. No 2. 23-29.

Komar A. S. (2018). Analysis of the design of presses for the preparation of feed pellets and fuel briquettes. TDATU Scientific Bulletin. Vol. 8. Iss. 2. 44-56. https://doi.org/10.31388/2220-8674-2018-2-9

Boltyansky O. V., Boltyanska N. I. (2006). The use of different criteria in determining the number of spare parts. Proceedings of the Tavrida State Agrotechnical Academy. Issue 36. 3-7.

A guide to reliability. T. 1 Per. from English Ed. B. R. Levin. Moscow. World. 1969. 393.

Boltyanska N. I. (2018). Ensuring the highly efficient functioning of the process of production of livestock products by improving the reliability of technology. Scientific Herald of National University of Life and Environmental Science of Ukraine. Series: technique and energy of APK. Kyiv, Ukraine. Vol. 282, Part 1. 181-192.

Завантаження

Опубліковано

2020-01-27

Номер

Розділ

Статті