Залишкові напруження у сталі ШХ15 після іонного азотування

Автор(и)

  • В. Г. Каплун
  • Т. В. Донченко
  • П. В. Матвіїшин

Анотація

REMAINING TENSIONS IN SHH15 STEEL AFTER ION NITRIDING

V. Kaplun,T. Donchenko,P. Matviyishyn

 

Causing on the surface of diffusive coverages the method of the ionic nitriding in hydrogen-free environments is by the effective method of increase of wear proofness and longevity of details of machines. In diffusive coverages there are remaining tensions of clench, that positively influence on durability and longevity of construction elements at of stretch, to the tiredness at a bend and pin endurance in the process of the cyclic loading.Remaining tensions are not evenly distributed on the thickness of coverage, but their size and character of distribution depend and follow the technological parameters of process of diffusive satiation. . For practice an extraordinarily large value has determination of size and character of remaining tensions. taking into account material and structural features of details of machines, type of coverages and technology of their causing.

For practice an extraordinarily large value has determination of size and character of remaining tensions. taking into account material and structural features of details of machines, type of coverages and technology of their causing. Among existent methods majority of присв?to ячена determination of average of remaining tensions in coverages that turn out the method of besieging, with assumption of them even distribution on a thickness.Considerably less part of methods exists for determination of remaining tensions in diffusive coverages, in that the considerable unevenness of their distribution takes place on the thickness of coverage. Known method of М.М.Dаvidenкоv for of determination of remaining tensions in diffusive coverages by the method of digestion difficult and requires the special equipment and corresponding chemical preparations for digestion of coverages.

Weare apply the new experimentally-calculation method of determination of remaining tensions in diffusive coverages, that includes determination of parameter of rejection of standard from rectilineal position at loading of the cantilever envisaged standard with coverage on an overhead plane and identical standard without coverage by an identical load . For the differences of bending of these standards after corresponding formulas the mean values of remaining tensions and their values were determined to the different point on the thickness of coverage.

Experimental researches of remaining tensions in diffusive layers after the ionic nitriding of steel of SHH15 in hydrogen-free environments after the different technological modes showed, that their size can be changed in wide intervals with the help of change of technological parameters of ionic nitriding. On the basis of planning of experiments analytical and graphic dependences of size of remaining tensions are got on the change of technological parameters of process of the ionic nitriding, set dependence of remaining tensions on the surface of the nitrided layer from his hardness.

Посилання

Каплун В. Г. ?онное азотирование в безводородных середах / В. Г. Каплун, П. В. Каплун // Хмельницький : ХНУ, 2015. – 344 с.

Давиденков Н. Н. Об измерении остаточных напряжений / Н. Н. Давиденков // Заводская лаборатория. – 1937. – № 8. – С. 987–990.

Карпенко Г. В. Влияние диффузионных покрытий на прочность стальных изделий / Г. В. Карпенко, В. ?. Похмурский, В. Б. Далисов, B. C. Замиховский. – К. : Наук. думка, 1971. – 167 с.

Барвинок В. А. Теоретические и экспериментальные исследования формирования напряженного состояния плазменных покрытий / В. А. Барвинок, В. ?. Богданович, А. Г. Цидулко // В кн.: Температуроустойчивые покрытия. – Л. : Наука, 1985. – С. 141–145.

Похмурский В. ?. Характер распределения остаточных напряжений первого рода в поверхностных слоях сталей и сплавов с защитными покрытиями / В. ?. Похмурский, Г. В. Карпенко // Физико-химическая механика металлов, 1968. – Т. 4, № 4. – С. 381–383.

Антонюк В. С. Залишкові напруження в вакуум-плазмових покриттях TiN, (TiAl)N, (TiC)N / В. С. Антонюк, О. Б. Сорока, А. В. Рутковський, В. І. Мірненко // Вісник Східноукраїнського національного університету ім. Володимира Даля. – 2004. – № 7 (77), ч. 2. – С. 206–210.

Teixeira V. Residual stress and cracking in thin PVD coatings / V. Teixeira // Vacuum. – 2002. – V. 64, № 3–4. – C. 393–399.

Патент 101477030 CN. G01N19/04. Measuring method for residual stress in coating / Binshi Xu, Xiancheng Zhang, Haidou Wang; Yixiong Wu. – № 200810055923.1; заявл. 02.01.2008 ; опубл. 08.07.2009.

Патент № 28383 Україна: GO 1L1/06. Спосіб визначення структурних і температурних складових залишкових напружень в покриттях / Антонюк B. C., Сорока О. Б., Клименко С. А., Копейкіна М. Ю. – № u200707507 ; заявл. 04.07.2007 ; опубл. 10.12.2007

А.С. 1805307. G01L1/00. Способ определения остаточных напряжений в полосовых заготовках / Колмогоров Г. Л. – № 4888114/28 ; заявл. 06.12.1990 ; опубл. 30.03.1993, Бюл. № 12.

Каплун П. В. Визначення залишкових напружень в азотованих шарах після іонного азотування / П. В. Каплун, В. А. Гончар, Т. В. Донченко, В. О. Курская // Вісник Хмельницького національного університету. Серія «Технічні науки». – 2015. – № 6.– С. 7–12.

Красовский Г. ?. Планирование эксперимента / Г. ?. Красовский. – Минск : ?зд-во БГУ, 1982. – 302 с.

Завантаження

Опубліковано

2017-02-16

Номер

Розділ

Статті