Development of a comprehensive maintenance program electrotechnical complexes of food production
DOI:
https://doi.org/10.31548/energiya2019.04.014Abstract
Abstract. The stages of the process of forming a comprehensive program of maintenance and repair of equipment based on the principles of Reliability-Centered Maintenance (IEC 60300-3-11: 2009) are analyzed and revealed. The analysis of functioning of electrotechnical complexes of food production is carried out, the stages of service are determined on the basis of reliability. The key electrotechnical equipment for the development of the forecasting subsystem in the system of realization of the service process on the basis of reliability for the electrotechnical complexes of food production is determined. It is shown that the proposed methodology will allow to identify the optimal composition of preventive and corrective maintenance works. The maintenance program developed must be revised and periodically reviewed, depending on the monitoring of changes in performance and data on failures of electrical equipment during its operation. As a result, the structure of the system of implementation of the maintenance program, including the process of analysis of the state of electrical equipment, using the subsystems of reliability prediction of the primary measuring transducers and electric motors was developed, and further steps required to ensure the purposes of production management were recommended. Further studies will include software and technical implementation of a comprehensive maintenance program.
Key words: electrical equipment, diagnostics, maintenance, reliability based services
References
Gubarevich, O. V. (2016). Nadiynistʹ i diahnostyka elektroobladnannya [Reliability and diagnostics of electrical equipment]. Severodonetsk.
Eremeev, S. N. (2001). Profylaktycheskoe obsluzhyvanye élektrodvyhateley vysokonahruzhennoho tekhnolohycheskoho oborudovanyya [Preventive maintenance of electric motors of highly loaded technological equipment]. Electricity, 3.
Lut, M. T., Bragida, M. V., Batechko, N. G. (2015). Osnovy tekhnichnoyi ekspluatatsiyi elektroobladnannya i system avtomatyzatsiyi: navchalʹnyy posibnyk [Fundamentals of technical operation of electrical equipment and automation systems: a textbook], Kiev, 410.
Reliability in technology. Reliability management. Maintenance-oriented maintenance. URL: https://meganorm.ru/Data2/1/4293775/4293775258.pdf.
Zaiets, N., Vlasenko, L., Lutskaya, N., Usenko, S. System Modeling for Construction of the Diagnostic Subsystem of the Integrated Automated Control System for the Technological Complex of Food Industries ICMRE 2019. The 5th International Conference on Mechatronics and Robotics Engineering, February 16-19, 2019, Rome, Italy, 93-99.
https://doi.org/10.1145/3314493.3314523
Zaiets, N., Kondratenko, I. Development of an Intelligent System for Predicting the Reliability of Electric Motors. IEEE 39th International Conference on Electronics and Nanotechnology (ELNANO), April 16-18, 2019, Kyiv, Ukraine, 614-619.
Downloads
Published
Issue
Section
License
Relationship between right holders and users shall be governed by the terms of the license Creative Commons Attribution – non-commercial – Distribution On Same Conditions 4.0 international (CC BY-NC-SA 4.0):https://creativecommons.org/licenses/by-nc-sa/4.0/deed.uk
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
