Driving characteristics of the electrical technological complex for pre-sowing treatment of agricultural seeds in magnetic field
DOI:
https://doi.org/10.31548/energiya2019.05.030Abstract
Анотація. При проектуванні та дослідженні електропривода транспортера необхідно знати його приводні характеристики. Нині зміну координат електропривода транспортерів в перехідних процесах визначають, як правило, експериментально. Застосування аналітичних методів значно спрощує їх визначення.
Насіння сільськогосподарських культур, яке оброблюється в магнітному полі, має різну густину, що обумовлює зміну приводних характеристик транспортера. Крім того, навантажувальна характеристика транспортера має змінний характер.
Мета дослідження – визначення та аналіз приводних характеристик електропривода транспортера електротехнологічного комплексу для передпосівної обробки насіння сільськогосподарських культур в магнітному полі.
Конструкція розробленого пристрою для магнітної обробки насіння передбачає установку 4 пар магнітів на основі NdFeB паралельно над і під стрічкою транспортера зі змінною полярністю. Конструкція транспортера передбачає застосування 4 барабанів для забезпечення можливості монтажу магнітної плити під стрічкою транспортера.
Визначення тягового зусилля на приводному барабані проводилося за відомою методикою. Це дало можливість визначити зусилля на приводному барабані та потужність приводного двигуна.
Отримані аналітичні вирази для визначення механічної, інерційної та навантажувальної характеристики транспортера при транспортуванні насіння різних сільськогосподарських культур. Експериментально визначені зведений момент статичних опорів та момент інерції транспортера на холостому ході.
Отборочные приводные характеристики транспортера электротехнических комплексов для передового обращения в магнитный пол, за исключением визового режима для граждан США, для обеспечения оптимальной значимости при беспрецедентных экономических последствиях.
Ключевые слова: транспортер, электропривод, механическая характеристика, момент инерции , наванта характеристика
References
Sinyavsky, O. Yu., Savchenko, V. V., Kozyrskyi, V. V., Bunko, V. Ya., Ramsh, V. Yu. (2019). Elektropryvod i avtomatyzatsiia [Electric drive and automation]. Kyiv: FOP Yamchynskyi O.V., 619.
Lodewijks, G. (2016). Dynamics of belt systems. Delfi:Univercity of technology, 256.
He, D., Pang, Y., Lodewijks, G. (2016). Belt Conveyor Dynamics in Transient Operation for Speed Control. International Journal of Civil, Environmental, Structural, Construction and Architectural Engineering. 10(7), 859 - 864.
Pavlov, V. E. (2018). Issledovaniye rezhimov puska elektroprivoda lentochnogo konveyera metodom komp'yuternogo modelirovaniya [Investigation of the start-up of the electric drive belt conveyor by computer simulation]. Vestnik Irkutskogo gosudarstvennogo tekhnicheskogo universiteta, 22 (4), 135 - 147.
https://doi.org/10.21285/1814-3520-2018-4-136-147
Rajković, B., Ilić, Z., Mijović, R. (2013). Transient time determination at start up of belt conveyor for ore. Mining and Metallurgy Institute Bor, 109, 53 - 60.
https://doi.org/10.5937/mmeb1302053R
Kozyrskyi, V., Savchenko, V., Sinyavsky, О. (2018). Presowing Processing of Seeds in Magnetic Field. Handbook of Research on Renewable Energy and Electric Resources for Sustainable Rural Development. IGI Global, USA, 576 - 620.
https://doi.org/10.4018/978-1-5225-3867-7.ch024
AC Induction Motor, AC Induction Gear Motor. Available at: motor-net.com / 01-2ik6W. html.
Savchenko, V. V., Sinyavsky, O. Yu., Shahai, R. H. (2019). Perekhidni protsesy v elektropryvodi transportera elektrotekhnolohichnoho kompleksu dlia peredposivnoi obrobky nasinnia v mahnitnomu poli [Transients in the electric drive of the conveyor of the electrotechnological complex for pre-sowing treatment of seeds in a magnetic field]. Visnyk Kharkivskoho natsionalnoho tekhnichnoho universytetu silskoho hospodarstva imeni Petra Vasylenka, 203, 88 - 89.
Downloads
Published
Issue
Section
License
Relationship between right holders and users shall be governed by the terms of the license Creative Commons Attribution – non-commercial – Distribution On Same Conditions 4.0 international (CC BY-NC-SA 4.0):https://creativecommons.org/licenses/by-nc-sa/4.0/deed.uk
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).