СТВОРЕННЯ СТРУКТУРНО-ТЕХНОЛОГІЧНА СХЕМА КОЛЕКТОРА ДОЇЛЬНОГО АПАРАТА
Abstract
В статті розглянута конструкція і технологічна схема двокамерного доїльного апарату колектора з частиною повітрозабірника, який забезпечує поліпшене транспортування молочної суміші. Також представлений вплив зміни обсягу молочної камери колектора та інтенсивність передачі молока на тиск у такті смоктання. Обґрунтовано умови для поліпшення транспортування молока до магістрального трубопроводу з молокошлангу від доїльного колектора машина. Також розглянуто вплив діаметра отвору дросельної заслінки на виробництвозаданої витрати повітря в розділі молококамери колектора, щоб створити необхідний градієнт тиску.References
Rasmussen M. D., Madsen N. P. Effects of milkline vacuum, pulsator inline vacuum, and cluster weight on milk yield, teat condition, and udder health. Journal of Dairy Science. 2000. Vol. 83. № 1. P. 77–84.
Petunin A., Burkot N. Selection of the type of milking glasses. Operation and maintenance. 2009. No 4. P. 28–30.
Dmitrov V. T. On the theory of movement of milk and air mixture in a milking machine. Visnyk of Lviv State Agrarian University: Agroengineering research. 2007. No 11. P. 124–130.
Jabbar M. Said The effect of tube length and ways of sucking on the vacuum level in a milking machine. The Iraqi jornal of Agricutural Sciences-38 (2). 2010. P. 91–96.
O'Callaghan E. J. Effect of the design of a milking unit on vacuum variations during simulated milking. Irish
Journal of Agricultural and Food Research. 2004. No 43. P. 237–245.
O'Callaghan E. J., Murphy P. M. A study of factors affecting the efficiency of milking operations. Teagasc, Dairy Production Research Center Ireland. 2009. P. 1–8.
O'Callaghant E. J., Gleeson D. E. A note on the effects of the teat-end vacuum on milking characteristics. Irish Journal of Agricultural and Food Research. 2004. 43. P. 265–269.
S. Rose-Meierhöfer A. B. Müller, L. Mittmann, S. Demba, A.-Ch. Entorf, G. Hoffmann, C. Ammon, H.-J. Rudovsky, R. Brunsch. Effects of quarter individual and conventional milking systems on infancy condition. Preventive Veterinary Medicine. 2014. Vol. 113, Issue 4. P. 556–564.
Fenenko A. I. Biotechnical system of milk production. Theory and practice. Monograph. Ed. acad. NAAN Adamchuk V. V. Nezhin. Published by PE Lysenko. 2014. 192 p.
Besier J., Bruckmaier R. Vacuum levels and milk-flow-dependent vacuum drops affect machine milking performance and teat condition in dairy cows. Journal of Dairy Science. 2016. Vol. 99, Issue 4. P. 3096–3102.
Bessera J., Lindb O., Bruckmaier R. Dynamics of the teat-end vacuum during the machine milking: types, causes and impacts on infectious condition and udder health - a literature review. Journal of Applied Animal Research. 2016. Vol. 44. No 1. P. 263–272.
Achkevich V. I., Tkach V. V., Fenenko A. I. A01J7/00 Patent for Utility Model 63894, Ukraine. Collector of milking machine. Applicant and patent holder National Science Center "Institute of Mechanization and Electrification of Agriculture". u200711601; stated. March 21, 2011; has published 01/25/2008, 2011. Bul. No 6.
Achkevich V. I., Fenenko A. I., Drigo V. O. A01J7 / 00 Patent for utility model 66812, Ukraine. Collector of milking machine. Applicant and patent holder National Science Center "Institute of Mechanization and Electrification of Agriculture". u200711602; stated. 22.10.2007; has published 01.25.2008. 2008.Bul. No 6.
Fenenko A. I. The operating characteristics of actuators for a new generation of milking plants. Sb. sciences Lviv State Agrarian University. Agroengineering research. 1999. № 3. 18–26.
Frolov E. S., Minaychev V. Ye., Aleksandrov A. T. Vacuum technology: reference book. Ed. E. S. Frolova, V. Ye. Minaycheva. Moscow. Mashinostroenie. 1992. 480.
Downloads
Published
Issue
Section
License
Relationship between right holders and users shall be governed by the terms of the license Creative Commons Attribution – non-commercial – Distribution On Same Conditions 4.0 international (CC BY-NC-SA 4.0):https://creativecommons.org/licenses/by-nc-sa/4.0/deed.uk
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
