Динамічний розрахунок гвинтового конвеєра із запобіжною муфтою

Authors

  • О. М. Троханяк Національний університет біоресурсів і природокористування України

DOI:

https://doi.org/10.31548/machenergy2020.03.115

Keywords:

гвинтовий конвеєр, шнек, муфта, канавка, крутний момент

Abstract

У статті показана схема роботи гвинтового конвеєра із запобіжною муфтою, проведений динамічний розрахунок його роботи. Розглянуті графічні залежності, за результатами яких можна оцінити вплив різноманітних параметрів системи на динамічні навантаження у привідних ланках конвеєра. Також представлений стенд для експериментальних випробувань механізму та проведено порівняння отриманих теоретичних та експериментальних досліджень роботи гвинтового конвеєра із запобіжною муфтою.

References

Hevko R. B., Klendiy M. B., Klendii O. M. (2016). Investigation of a transfer branch of a flexible screw conveyer. INMATEH: Agricultural Engineering. 48(1). 29-34.

Hevko R. B., Rozum R. I., Klendiy O. M. (2016). Development of design and investigation of operation processes of loading pipes of screw conveyors. INMATEH: Agricultural engineering. 50(3). 89-96.

Lyashuk O. L., Rogatynska O. R., Serilko D. L. (2016). Modelling of the vertical screw conveyer loading, INMATEH Agricultural Engineering. 45. 87-94.

Hevko R. B., Gladyo Y. B., Shinkarik M. I., Klendiy O. M. (2014). Dynamic calculation of the safety device of the screw conveyor. Bulletin of the Engineering Academy of Ukraine. 2. 163-168.

Hevko R. B., Klendiy O. M. (2013). Methods of research of the screw conveyor with the safety device. Agricultural machinery. 24. 67-75.

Rogovskii Ivan, Titova Luidmyla, Trokhaniak Viktor, Trokhaniak Oleksandra, Stepanenko Serhii. (2020). Experimental study of the process of grain cleaning in a vibro-pneumatic resistant separator with passive weeders. Bulletin of the Transilvania University of Brasov, Series II: Forestry, Wood Industry, Agricultural Food Engineering. 13 (62-1). 117-128. https://doi.org/10.31926/but.fwiafe.2020.13.62.1.11.

Rogovskii Ivan, Titova Luidmyla, Trokhaniak Viktor, Trokhaniak Oleksandra, Stepanenko Serhii. (2019). Experimental study on the process of grain cleaning in a pneumatic microbiocature separator with apparatus camera. Bulletin of the Transilvania University of Brasov, Series II: Forestry, Wood Industry, Agricultural Food Engineering. 12 (61-1). 117-128. https://doi.org/10.31926/but.fwiafe.2019.12.61.1.10.

Kresan Tetiana, Pylypaka Serhii, Ruzhylo Zynovii, Rogovskii Ivan, Trokhaniak Oleksandra. (2020). External rolling of a polygon on a closed curvilinear profile. Acta Polytechnica. 60(4). 313-317. https://doi.org/10.14311/AP.2020.60.0313.

Downloads

Published

2020-08-21

Issue

No. 11(3) (2020)

Section

Статті

License

Relationship between right holders and users shall be governed by the terms of the license Creative Commons  Attribution – non-commercial – Distribution On Same Conditions 4.0 international (CC BY-NC-SA 4.0):https://creativecommons.org/licenses/by-nc-sa/4.0/deed.uk

Authors who publish with this journal agree to the following terms:

  • Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
  • Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  • Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).