Discrete model of chain conveyor movement dynamics
DOI:
https://doi.org/10.31548/machenergy2020.04.089Keywords:
сonveyor, weight, model.Abstract
Improving the reliability of structures of transport mechanisms and other elements, reducing metal content, improving performance, expanding functionality and technical capabilities is a priority area of work to improve existing and develop new machines for beet growing. The dynamic model of the chain conveyor which considers the basic movement and fluctuations of elements of the drive and a working cloth is developed in work. The model is represented by a system of discrete masses with eight degrees of freedom.
The operation of chain conveyors is characterized by the presence of dynamic forces arising from the pulsating movement of the chain at a steady rotation of the drive sprocket. At the start-up site, dynamic forces from increasing the speed from zero to a certain constant value are added to these forces. Under such conditions, significant alternating dynamic loads can occur in the chain, which as a result of the accumulation of fatigue phenomena can lead to its premature destruction.
References
Shabelnik B. P. (1998). Conveyors-cleaners of root-harvesting machines. Kyiv. 243.
Volkov P. M., Tenenbaum M. M. (1977). Basics of the theory and calculation of agricultural machines for strength and reliability. Moscow. 310.
Khorolsky I. M. (1999). Dynamics of chain systems and closed circuits of continuous transport machines. Lviv. 208.
Zinoviev V. A., Bessonov A. P. (1964). Fundamentals of dynamics of machine units. Moscow. 239.
Kozhevnikov S. N. (1986). Dynamics of nonstationary processes in machines. Кyiv. 288.
Kornev G. V. (1968). Continuous lifting and transport machines used in agriculture. Kyiv. 152.
Perten Yu. A., Misailov V. K., Yantovsky L. (1981). Theoretical foundations of conveyors with traction elements: Publishing House of Leningrad University. 270.
Fedorchenko A. M. (1999). Experimental foundations and mathematical formulation of the fundamental laws of physics. Kyiv. 288.
Loveykin V. S., Yaroshenko V. F., Korobko M. M. (2006). Analysis of start-up modes of chain conveyors of agricultural machines. Proceedings of the Tavriya State Agrotechnical Academy. Melitopol. Issue 40. 221-230.
Pylypaka S. F., Nesvidomin V. M., Klendii M. B., Rogovskii I. L., Kresan T. A., Trokhaniak V. I. (2019). Conveyance of a particle by a vertical screw, which is limited by a coaxial fixed cylinder. Bulletin of the Karaganda University – Mathematics. 95(3). 108-118. doi 10.31489/2019M2/108-119.
Rogovskii I. L., Titova L. L., Trokhaniak V. I., Solomka O. V., Popyk P. S., Shvidia V. O., Stepanenko S. P. (2019). Experimental studies of drying conditions of grain crops with high moisture content in low-pressure environment. INMATEH. Agricultural Engineering. Bucharest. 57(1). 141-146.
Loveikin V., Romasevych Y., Shymko L., Ohiienko M., Duczmal W., Potwora W., Titova L., Rogovskii I. (2020). Agrotronics and optimal control of cranes and hoisting machines: monograph. Opole: The Academy of Management and Administration in Opole. 164.
Zagurskiy О., Ohiienko M., Pokusa Т., Zagurska S., Pokusa F., Titova L., Rogovskii І. (2020). Study of efficiency of transport processes of supply chains management under uncertainty. Monograph. Opole: The Academy of Management and Administration in Opole. 162.
Rogovskii I. L., Titova L. L., Trokhaniak V. I., Rosamaha Yu. O., Blesnyuk O. V., Ohiienko M. M. Ohiienko A. V. (2019). Engineering management of two-phase coulter systems of seeding machines for implementing precision farming technologies. INMATEH. Agricultural Engineering. 2019. 58(2). 137-146. doi: 10.35633/INMATEH-58-15.
Downloads
Published
Issue
Section
License
Relationship between right holders and users shall be governed by the terms of the license Creative Commons Attribution – non-commercial – Distribution On Same Conditions 4.0 international (CC BY-NC-SA 4.0):https://creativecommons.org/licenses/by-nc-sa/4.0/deed.uk
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
