Покращення продуктивності бункера протруювача насіння
DOI:
https://doi.org/10.31548/machenergy2020.04.095Keywords:
бункер, гіперболоїдальний, тертя, тиск, рівномірність.Abstract
Розглянуто питання вдосконалення конструкції бункера протруювача насіння. В результаті проведених досліджень запропоновано покращення продуктивності бункера за рахунок запропонованої зміни форми та визначення необхідних параметрів для покращення продуктивності бункера в протруювачах насіння. Запропоноване вдосконалення дозволяє підвищити продуктивність бункера - дозатора насіння сільськогосподарських культур незалежно від висоти заповнення ним бункера та зернистих матеріалів в інших галузях, зменшення металоємкості і габаритів відповідних машин, у яких застосовуються такі бункери.References
Timoshenko S. P., Ratushnyy V. V., Stibel' I. V., Mazur D. M. (2002). Substantiation, development and research of the universal process of application of protective drugs on crop seeds. Mechanization and electrification of agriculture. Glevaha. 86. 114-121.
Atomyan V. M. (1960). Free flow and sowing of seeds with grain seeders. Yerevan: From the Main Department of Agriculture Science Ministry of Agriculture of the Armenian SSR 138.
Buzenkov M., Ma S. A. (1976). Sowing machines for agricultural crops. Moscow. Mashinostroyeniye. 271.
Timoshenko S. P., Vechera A. N., Timoshenko S. I. Method of treating seeds with liquid preparations. Patent № 96498 A01S 1/08, 2006/01, p.10 / 11/2011, byul.№21.
Timoshenko S. P., Mikhaylenko M. A. (1978). To develop the working bodies of seed treaters and substantiate their optimal parameters. Section No. 2 of the Report on topic No. 4 of research work of UNIIMESH, Glevakha, 77.
Gyachev L. V. (1992). Fundamentals of bunker theory. Novosibirsk: Novosibirsk Publishing House. un-ta. 309.
Trimbach S. P., Vechera O. M. (2011). Current state and prospects of development of machines for seed treatment of agricultural cultures. Design, manufacture and operation of agricultural machinery. 41. 406-413.
Rogovskii I. L. (2017). Probability of preventing loss of efficiency of agricultural machinery during exploitation. Scientific Herald of National University of Life and Environmental Science of Ukraine. Series: Technique and energy of APK. Kyiv. 258. 399-407.
Kalinichenko D., Rogovskii I. (2018). Method for determining time of next maintenance of combine harvesters. TEKA. An International Quarterly Journal on Motorization, Vehicle Operation, Energy Efficiency and Mechanical Engineering. 18(1). 105-115.
Romaniuk W., Polishchuk V., Marczuk A., Titova L., Rogovskii I., Borek K. (2018). Impact of sediment formed in biogas production on productivity of crops and ecologic character of production of onion for chives. Agricultural Engineering (wir.ptir.org). Krakow. Poland. 22(1). 105-125. https://doi.org/10.1515/agriceng-2018-0010.
https://doi.org/10.1515/agriceng-2018-0010
Pylypaka S. F., Nesvidomin V. M., Klendii M. B., Rogovskii I. L., Kresan T. A., Trokhaniak V. I. (2019). Conveyance of a particle by a vertical screw, which is limited by a coaxial fixed cylinder. Bulletin of the Karaganda University - Mathematics. 95(3). 108-118. doi 10.31489/2019M2/108-119. https://doi.org/10.31489/2019M2/108-119
Rogovskii I. L., Titova L. L., Trokhaniak V. I., Solomka O. V., Popyk P. S., Shvidia V. O., Stepanenko S. P. (2019). Experimental studies of drying conditions of grain crops with high moisture content in low-pressure environment. INMATEH. Agricultural Engineering. Bucharest. 57(1). 141-146. https://doi.org/10.35633/INMATEH_57_15
Loveikin V., Romasevych Y., Shymko L., Ohiienko M., Duczmal W., Potwora W., Titova L., Rogovskii I. (2020). Agrotronics and optimal control of cranes and hoisting machines: monograph. Opole: The Academy of Management and Administration in Opole. 164.
Zagurskiy О., Ohiienko M., Pokusa Т., Zagurska S., Pokusa F., Titova L., Rogovskii І. (2020). Study of efficiency of transport processes of supply chains management under uncertainty. Monograph. Opole: The Academy of Management and Administration in Opole. 162.
Rogovskii I. L., Titova L. L., Trokhaniak V. I., Rosamaha Yu. O., Blesnyuk O. V., Ohiienko M. M. Ohiienko A. V. (2019). Engineering management of two-phase coulter systems of seeding machines for implementing precision farming technologies. INMATEH. Agricultural Engineering. 2019. 58(2). 137-146. doi: 10.35633/INMATEH-58-15.
Downloads
Published
Issue
Section
License
Relationship between right holders and users shall be governed by the terms of the license Creative Commons Attribution – non-commercial – Distribution On Same Conditions 4.0 international (CC BY-NC-SA 4.0):https://creativecommons.org/licenses/by-nc-sa/4.0/deed.uk
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
