Dynamic energy balance of a building under the influence of changes in the thermal inertial properties of the building envelope and heating modes
DOI:
https://doi.org/10.31548/energiya6(76).2024.152Abstract
Energy efficiency in buildings is one of the key areas for reducing energy consumption and greenhouse gas emissions. Optimisation of heat flows and heating modes contributes to increasing the energy efficiency of buildings and reducing heating costs.
The purpose of the study is to conduct a parametric analysis of the components of the building heat balance and heat flows in rooms with different thermal properties.
The research methods include the use of DesignBuilder software, which is based on the EnergyPlus platform. On the basis of this software, a non-stationary multi-zone energy model of a multi-storey building was created, which is used to determine the components of the energy balance of a representative room at different parameters of structural elements and operating modes of the heating system.
The results of the study showed that the energy consumption of north-facing buildings for heating purposes is on average 34.8% to 38.3% higher than that of south-facing buildings, depending on the wall thickness. The use of intermittent heating modes can reduce heat consumption by up to 19.9%, depending on the thickness and type of building. It was also found that insulation of external walls and replacement of windows with energy-efficient ones have a much greater potential for reducing energy consumption than changing the mass of internal walls. One of the south-facing models with a constant heating mode in January showed a 39.2% reduction in heating costs compared to a similar model without insulation. The additional introduction of intermittent heating modes can reduce energy consumption by up to 22.3% for south-facing rooms and up to 21.4% for north-facing rooms.
The obtained results can be used to develop recommendations for optimal regulation of heating modes for premises with different characteristics of external and internal walls, which will contribute to the energy efficiency of buildings.
Key words: EnergyPlus, dynamic modelling, heat losses, solar heat gain, climate data, energy efficiencyReferences
Asdrubali, F., Venanzi, D., Evangelisti, L., Guattari, C., Grazieschi, G., Matteucci, P., & Roncone, M. (2020). An Evaluation of the Environmental Payback Times and Economic Convenience in an Energy Requalification of a School. Buildings, 11(1), 12. doi:10.3390/buildings11010012
Buyak, N., Deshko, V., Bilous, I., Pavlenko, A., Sapunov, A., & Biriukov, D. (2023). Dynamic interdependence of comfortable thermal conditions and energy efficiency increase in a nursery school building for heating and cooling period. Energy, 283. doi:10.1016/j.energy.2023.129076
Deshko, V., Bilous, I., & Osadcha, М. (2021). Consideration of solar heat impact into the calculation methods of heat energy needs. Energy and Automation, 2(54), 26–38. doi:10.31548/energiya2021.02.026
Hajji, A., Lahlou, Y., & Abbou, A. (2022). Impact of Solar Gain on Energy Consumption and Thermal Comfort. In S. Bennani, Y. Lakhrissi, G. Khaissidi, A. Mansouri, & Y. Khamlichi (Eds.), WITS 2020 (Vol. 745, pp. 723–733). Springer Singapore. doi:10.1007/978-981-33-6893-4_66
DBN V.2.6-31:2021. Thermal Insulation and Energy Efficiency of Buildings. Replacing DBN V.2.6-31:2016; effective from 2022-09-01. Official edition. Kyiv, 2021. 23 p. (n.d.).
Deshko, V. I., Bilous, I. Yu., & Buyak, N. A. (2019). Influence of periodic heating modes on the dynamics of energy need and human thermal comfort for buildings with different thermal protection. KPI Science News, 0(4), 7–16. doi:10.20535/kpi-sn.2019.4.180731
Deshko, V., Bilous, I., Buyak, N., & Shevchenko, O. (2020). The Impact of Energy-Efficient Heating Modes on Human Body Exergy Consumption in Public Buildings. 2020 IEEE 7th International Conference on Energy Smart Systems (ESS), 201–205. doi:10.1109/ESS50319.2020.9160270
Deshko, V., Bilous, I., Buyak, N., & Petruchenko, O. (2020). Analysis of the influence of energy efficient heating modes on buildings energy use basing on the mathematical modeling. POWER ENGINEERING: Economics, Technique, Ecology, 4. doi:10.20535/1813-5420.4.2020.233593
DesignBuilder. (n.d.). [Computer software]. DesignBuilder Software Ltd. https://designbuilder.co.uk/
EnergyPlus Energy Simulation Software. (n.d.). [Computer software]. http://apps1.eere.energy.gov/buildings/energyplus
International Weather for Energy Calculations. (n.d.). [Dataset]. https://climate.onebuilding.org/WMO_Region_6_Europe/UKR_Ukraine/index.html#IDKC_Kiev_City-
Downloads
Published
Issue
Section
License
Relationship between right holders and users shall be governed by the terms of the license Creative Commons Attribution – non-commercial – Distribution On Same Conditions 4.0 international (CC BY-NC-SA 4.0):https://creativecommons.org/licenses/by-nc-sa/4.0/deed.uk
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
