Research of remote protection operation in a branched sectioned line 10 kV

Authors

DOI:

https://doi.org/10.31548/energiya2021.01.039

Abstract

Abstract. The article investigates the parameters of setting up adjacent remote protections with remote start-up, taking into account the peculiarities of operating modes and operating conditions of partitioned branched distribution lines. The influence of parameters and modes of operation of such lines on the range of adjustment of settings on resistance and time of operation at the end of a zone of action and requirements to linearity of time characteristics that allows to define distances to a place of short circuit on operation time is defined.

The results for setting up remote protections of partitioned lines with sources of distributed generation are obtained: the conditions for adjusting the protection settings for resistance to operation are determined taking into account the parameters of the partitioned lines and the limits of adjusting the settings for resistance to secondary values are determined.

The conditions for adjusting the settings by the time of operation and the limits of the time of operation of protection for most lines are determined.

For selective operation of protection at the selected settings on time of operation unambiguity of time characteristics at change of sizes of working currents of protection on condition of ten percent accuracy of work of protection on resistance of operation is provided.

The conditions for ensuring the selective operation of adjacent protections in the selected range of settings by the time of operation, taking into account the ratio of resistances and the difference in the time of operation are determined.

The initial time of protection protection is substantiated for debugging of protection on time of operation against operation of overvoltage limiters and against burnout of fusible insert of fuses of branches and unsoldering at short circuit directly behind the fuse. The use of modern microprocessor protection devices will ensure, on the one hand, the accuracy of the resistance, linear and unambiguous dependence of the operating time on the resistance of the short circuit at different levels of currents and voltages, etc., and on the other hand - ease of maintenance.

Key words: distance protection, short circuit, sectioned lines, distributed generation sources, sensitivity, selectivity

References

Omelchuk, A. O., Voloshyn, S. M., Tarasiuk, O. I. (2019). Vdoskonalennia sposobiv vykonannia zakhystiv linii zv'iazku z pidstantsiiamy rozoseredzhenykh dzherel heneratsii (RDH) [Improving methods of protection of lines of communication with substations of distributed sources of generation (DSG)]. Enerhetyka i avtomatyka, 5, 107-115.

https://doi.org/10.31548/energiya2019.05.107

Omelchuk, A. O., Voloshyn, S. M., Tarasiuk, O. I. (2019). Shchodo zakhystu rozpodilnykh sektsionovanykh linii z merezhevym rezervuvanniam [Regarding the protection of distribution partitioned lines with network redundancy]. Enerhetyka i avtomatyka, 6, 55-65.

Shabad M. A. (2003). Raschety releynoy zashchity i avtomatiki raspredelitel'nykh setey: monografiya [Calculations of relay protection and automation of distribution networks]. SPb.: PEIPK, 350.

Downloads

Published

2021-04-27

Issue

No. 1 (2021)

Section

Статті

License

Relationship between right holders and users shall be governed by the terms of the license Creative Commons  Attribution – non-commercial – Distribution On Same Conditions 4.0 international (CC BY-NC-SA 4.0):https://creativecommons.org/licenses/by-nc-sa/4.0/deed.uk

Authors who publish with this journal agree to the following terms:

  • Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
  • Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  • Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).