Analysis of automated control systems of equipment for transportation of grain products on elevators
DOI:
https://doi.org/10.31548/energiya2021.06.018Abstract
This article presents an analysis of the process of routing process lines in the elevator, which is carried out by an automated control system. The relevance of this topic is justified on the basis of the mismatch of elevator productivity to modern needs and volumes of grain products. As the organizational and functional structure of elevator complexes remains without significant changes, which directly affects the characteristics of the management of the technological process of transportation and as a consequence on the quality of grain products. And since the volumes and requirements will always only increase, the question arises in the increased efficiency of elevator processes under the same conditions, with possible changes that will result in modernization, optimization and improvement of the process itself without changing the technological layout of equipment.
Therefore, the purpose of the study was to analyze the methods of organization and management of technological routes of transportation at the elevator complex, to determine opportunities to improve its productivity.
During the study of the control process and technological routes of the elevator complex, the structural control scheme and the algorithm for laying the route of grain movement at the specified coordinates were analyzed. According to the found shortcomings, one of the directions of increase and improvement of technological process on the elevator was defined, which consists in improvement of control algorithms towards optimization of technological processes of the elevator on many criteria which should improve not only operational indicators, but also qualitative indicators of production. What is the problem in optimizing the modes and structural parameters of control of the electromechanical complex of the elevator, by improving existing and developing new methods, software and hardware means of operational intervention in the modes of electromechanical equipment of the elevator to improve energy saving and product quality.
Key words: technological process, transport lines, automated control system, route algorithm, control scheme, SCADA system, elevator complex
References
Oborudovanie dlya elevatorov [Equipment for elevators]. Inzhenerno-Proizvodstvennyj Centr «Vektor». Available at: http://vektor.org.ua/oborudovanie/zernohranilishha/20-oborudovanie-dlya-elevatorov
Mardzyavko, V. A. (2021). Upravleniya tekhnologicheskimi marshrutami elevatornogo kompleksa za schet avtomatizacii [Management of technological routes of the elevator complex due to automation]. Perspektivnaya tekhnika i tekhnologii v APK, 40–42.
Vtyurin, V. A. (2006). Avtomatizirovannye sistemy upravleniya tekhnologicheskimi processami, osnovy ASUTP [Automated control systems for technological processes, the basics of the process control system]. St. Petersburg, 152.
Procta, Y. І. (2011). Avtomatizacіya virobnichih procesіv [Automation of production processes]. TNTU іm. І. Pulyuya, 344.
Prosyanyk, A. V., Prosyanik, M. A., Tkachenko, S. M. (2012). Perspektivnye napravleniya razvitiya avtomatizirovannyh sistem na predpriyatiyah hraneniya i pererabotki zerna [Promising directions for the development of automated systems at grain storage and processing enterprises]. Zbіrnik naukovih prac' Nacіonal'no gіrnichogo unіversitetu, 39, 128–136.
Sosnin, K. V., Tkachenko, S. N., Prosyanyk, A. V. (2009). Avtomatizaciya peremeshcheniya zerna – oselok integrirovannoj ASU [Automation of grain movement - the touchstone of the integrated automated control system]. Hranenie i pererabotka zerna, 80(2), 35–40.
Prosyanik, A. V., & Gorbunov, M. Y. (2010). Zastosuvannya SCADA – sistemi dlya keruvannya tekhnologіchnimi marshrutami transportuvannya zerna [Application of SCADA - systems for management of technological routes of grain transportation]. Hranenie i pererabotka zerna, 130(4), 51–55.
Datasolution - Chto takoe SCADA. Proektirovanie SCADA. Ctruktura SCADA sistemy [Datasolution - What is SCADA. SCADA design]. (n.d.). Datasolution - O kompanii. Available at: http://datasolution.ru/chto-takoe-scada
Filimonov, H. S., Trishyn, F. A. (2017). Automation of traceability process at grain terminal llc «UKRTRANSAGRO». Zernovі produkti і kombіkormi, 17, 124–131.
Prosyanyk, A. V., Klabukov, V. F., Sosnin, K. V. (2012). Ot lokal'nyh zadach avtomatizacii k integrirovannoj ASU [From local automation tasks to integrated ACS]. Hranenie i pererabotka zerna, (4), 31–39.
Kudryashov, V. S., Alekseev, M. V., Ivanov, A. V. (2018). Reshenie zadach avtomatizacii elevatornogo kompleksa [Solving the problems of automation of the elevator complex]. Vestnik VGUIT, (1), 117–123.
Downloads
Published
Issue
Section
License
Relationship between right holders and users shall be governed by the terms of the license Creative Commons Attribution – non-commercial – Distribution On Same Conditions 4.0 international (CC BY-NC-SA 4.0):https://creativecommons.org/licenses/by-nc-sa/4.0/deed.uk
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
