A mathematical model for initiating discharge processes in liquid organic waste
DOI:
https://doi.org/10.31548/energiya2019.06.103Abstract
Abstract. In connection with the rapid development of high-voltage pulse technology, the phenomenon of electrical breakdown in a liquid is of increasing interest. Depending on the purpose of the installation, the working chamber can have various sizes and shapes.
To process the waste of pig-breeding complexes, we have developed an electropulse installation, the working chamber of which has a cylindrical shape, which allows us to simplify the modeling of processes that will occur during the breakdown of liquid in the chamber. The nature and sequence of the discharge processes of the installation depends on such parameters as the state of the electrodes, their shape of exacerbation, the length of the interelectrode gap, the viscosity of the liquid in the chamber, and the presence of impurities.
The use of a high-voltage spark as a “working tool” became the first stage of a complex technological process in which a liquid-insulating working medium.
The article gives a generalized scheme of the experimental setup, the questions of mathematical modeling of the optimal operating modes of the electric pulse installation are considered. The features of constructing a mathematical model of the electropulse conversion of energy in liquid are considered.
Considerable attention is paid to the process of operation of an electric pulse installation, where the current technological mechanism is pressure pulses that emit in the channel of high voltage discharges in an organic liquid. The effectiveness of the impact of pulses is spatially limited and decreases sharply with increasing distance from the axis of the channel and therefore it must be adjusted during the processing of the liquid.
In the calculation mathematical model it is necessary to take into account factors affecting the parameters of the pressure pulse in the liquid and the position of the electrodes in space. The article presents the equations of a linearized mathematical model of the processes that occur in the discharge channel of the working body of the electric pulse installation.
Key words: mathematical model, electric pulse installation, liquid organic waste
References
Ushakov, V.Ya., Klimkin, V.F., Korobeynikov, S.M., Lopatin, V.V. (2005). Proboyzhidkostey pri impulsnomnapryazhenii [Breakdown of liquids at pulse voltage]. Tomsk: Izd-vo NTL, 488.
Vovk, I. T., Drumiretskiy, V. B., Krivitskiy, E. V. Ovchinnikova, D. E. (1984). Upravlenie elektrogidravlicheskimi protsessami [Electrohydraulic process control]. Kyiv: Nauk. Dumka, 188.
Scherba, A. A., Kosenkov, V. M., Byichkov, V. M. (2015). Zamknutaya matematicheskaya model elektricheskogo i magnitnogo poley v razryadnoy kamere elektrogidravlicheskoy ustanovki [Closed mathematical model of electric and magnetic fields in the discharge chamber of an electro-hydraulic installation] / Elektronnaya obrabotka materialov, 51(6), 71-78.
https://doi.org/10.3103/S1068375515060113
Vovchenko, A. I., Shomko, V. V, Barbashova, G. A., Kamenskaya, L. A. (2014). I.Issledovanie gidrodinamicheskih protsessov pri mnogopulsatsionnom zakone vvoda energii v kanal elektricheskogo razryada v zhidkosti [The study of hydrodynamic processes in the multi-pulsation law of energy input into the channel of an electric discharge in a liquid], EOM, 50 (1), 66-71.
https://doi.org/10.3103/S1068375514010153
Mamutov, V. S., Mamutov, A. V. (2018). Numerical simulation of electrohydraulic processes. Mamutov1,MATEC Web of Conferences 245, 09015, 1-8.
Downloads
Published
Issue
Section
License
Relationship between right holders and users shall be governed by the terms of the license Creative Commons Attribution – non-commercial – Distribution On Same Conditions 4.0 international (CC BY-NC-SA 4.0):https://creativecommons.org/licenses/by-nc-sa/4.0/deed.uk
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
