Study of the dependence of efficiency on the load of a drilling machine
DOI:
https://doi.org/10.31548/energiya2021.02.127Abstract
Abstract. The question of research of dependence of efficiency on loading of the drilling machine is considered. To achieve this goal in the work were set and solved the following tasks: - to analyze the design and technological features of the drilling machine part; - to develop a new design of a drilling machine with a network analyzer; - to investigate the new design of a drilling machine with a network analyzer.
About 80 % of drilling machines at Ukrainian enterprises are operated in excess of the established shelf life, which leads to their low quality of operation, high accident rate and failure of electromechanical equipment. The average shelf life of the electric drive in the industry does not exceed 6 years. Up to 10–18 % of electric motors and up to 30 % of auxiliary equipment fail and are repaired annually. The vast majority of engines can be repaired 4-5 times and after repair often do not work even for one year.
The operation of drilling machines with an induction motor (short-circuited rotor), which are in poor technical condition, leads to an increase in financial costs due to increased power consumption. The cost of electricity consumed by the electric drive of drilling machines during the service life is significantly higher than the cost of equipment and maintenance costs and more than 4 times higher than its own. The electricity bill includes a system of surcharges for additional reactive power consumption. Reactive power charges at enterprises account for up to 10% of total electricity costs, and these costs tend to increase.
Today, there is a need to apply the latest technical solutions and scientific approaches to solving the problem of improving the quality of operation of asynchronous electric drives of drilling machines.
A research stand has been developed to determine the asynchronous motor of a drilling machine, which allows to identify the dependence of efficiency on the magnitude of the load, calculate the parameters of the substitution scheme and energy characteristics for the nominal mode of operation of the electric drive.
Key words: drilling machine, network analyzer, research stand
References
Zakladskji, O. M., Zakladskji, O. O. (2007). Suchasni metody rehuliuvannia yakosti elektroenerhii [Modern methods of electricity quality regulation]. Information collection "Industrial Power Engineering and Electrical Engineering" Promelectro, 2, 25-30.
Peresada, S. M., Shapoval, I. A., Korol', S. V. (2003). Eksperimental'noye testirovaniye algoritmov upravleniya mashinoy dvoynogo pitaniya [Experimental testing of control algorithms for a dual power supply machine]. Technical Electrodynamics, 2, 29-35.
Downloads
Published
Issue
Section
License
Relationship between right holders and users shall be governed by the terms of the license Creative Commons Attribution – non-commercial – Distribution On Same Conditions 4.0 international (CC BY-NC-SA 4.0):https://creativecommons.org/licenses/by-nc-sa/4.0/deed.uk
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
