On the question of knowledge formalization in the management of the production of enthomophages
DOI:
https://doi.org/10.31548/energiya2021.05.005Abstract
The article is devoted to the issue of formalization of knowledge in the management of entomophages production. The analysis of scientific works concerning the chosen direction of researches is carried out in the work, their urgency is substantiated. Factors influencing the efficiency of entomophages production management as a complex biotechnical system of ergatic type are identified.
The aim of the research was to formalize knowledge in the management of entomophages production to increase the efficiency of its operation. The object of research is the processes of entomophages production management. Research methods - system modeling, precedent-based management, data mining.
A model for presenting knowledge for entomophages production management based on precedents in the form of an associative map using the FreeMind software environment has been developed.
A method for management the production of entomophages based on the application of a precedent approach and data mining has been developed.
A precedent knowledge base has been developed using the Microsoft Access software environment for systematization of information on human operator actions in entomophages production management processes. The functioning of the knowledge base is based on production rules.
The expediency of formalization of knowledge in the management of entomophages production is scientifically substantiated, which creates the conditions for increasing the efficiency of production and the quality of entomological products. This is achieved by reducing the time for the formation of strategies for its management through the use of previous experience and structuring information on the actions of the operator-technologist in management processes in the form of a precedent knowledge base.
Key words: management, entomophages production, precedent, knowledge base, data mining
References
Lysenko, V. P., Chernova, I. S. (2021). Osnovni pidkhody do avtomatyzatsii protsesiv keruvannia vyrobnytstvom entomofahiv [Basic approaches to automation of entomophages production control processes]. Materialy Mizhnarodnoi naukovoi konferentsii. Odesa. Informatsiinyi biuleten SPRS MOBB, 58, 65-67.
Vlasenko, L. O. (2017). Intelektualne keruvannia tekhnolohichnym ob'iektom z vykorystanniam prohnoznykh modelei [Intelligent control of the technological object using predictive models]. Materialy IV Mizhnarodnoi naukovo-tekhnichnoi Internet-konferentsii K: NUKhT, 117.
Bobukh, A. O., Dzevochko, O. M., Podustov, M. O., Pereverzieva, A. M. (2016). Kompiuterno-intehrovane upravlinnia tekhnolohichnymy protsesamy za pokaznykamy yakosti produktsii [Computer-integrated management of technological processes according to product quality indicators]. Materialy III Mizhnarodnoi naukovo-tekhnichnoi Internet-konferentsii K: NUKhT, 20.
Lysenko, V. P., Chernova, I. S. (2021). Intelektualne upravlinnia vyrobnytstvom entomofahiv: monohrafiia [Intelligent management of entomophages production: monograph]. Odesa: Feniks, 156.
Zaporozhets, T. V. (2020). Zastosuvannia intelektualnykh tekhnolohii ta system shtuchnoho intelektu dlia pidtrymky pryiniattia upravlinskykh rishen [Application of intellectual technologies and artificial intellect systems to support management decisions]. Vcheni zapysky TNU imeni V.I. Vernadskoho. Seriia: Derzhavne upravlinnia, 31 (70), 2, 79-85.
https://doi.org/10.32838/2663-6468/2020.2/13
https://doi.org/10.32838/2663-6468/2020.2/13
https://doi.org/10.32838/2663-6468/2020.2/13
Romanov, M. S., Kyshenko, V. D., Ladaniuk, A. P. (2015). Rozrobka systemy stsenarnoho upravlinnia tekhnolohichnymy protsesamy pryhotuvannia pyva [Development of a scenario management system for technological processes of beer brewing]. Vostochno-Evropejskij zhurnal peredovy'kh tekhnologij, 2/3 (74), 49-55. https://doi.org/10.15587/1729-4061.2015.40458
https://doi.org/10.15587/1729-4061.2015.40458
Proskurka, Ye. S., Kyshenko, V. D. (2012). Intelektualizatsiia protsesiv keruvannia tekhnolohichnymy kompleksamy na osnovi pretsedentiv [Intellectualization of processes of management of technological complexes on the basis of precedents]. Naukovi pratsi NUKhT, 42, 23-28.
https://doi.org/10.1016/j.forpol.2012.07.008
Nikolajchuk, O. A. (2009). Modelirovanie znanij dlya issledovaniya dinamiki tekhnicheskogo sostoyaniya unikal'nyh ob"ektov [Knowledge modeling for studying the dynamics of the technical state of unique objects]. Problemy upravleniya, 4, 58-65.
Spirin, O. M., Vakaliuk, T. A. (2018). Khmaro oriientovani intelektualni karty yak zasib informatsiino-analitychnoi pidtrymky profesiinoi diialnosti vykladacha [Cloud-oriented smart maps as a means of information and analytical support of the teacher's professional activity]. Naukovi zapysky Berdianskoho derzhavnoho pedahohichnoho universytetu. Seriia: Pedahohichni nauky. Berdiansk: BDPU, 1, 227-234.
https://doi.org/10.31494/2412-9208-2018-1-1-227-234
Nesterenko, O. V., Kovtunets, O. V., Falovskyi, O. O. (2017). Intelektualni systemy i tekhnolohii. Vvidnyi kurs: Navch. Posibnyk [Intelligent systems and technologies. Introductory course: Textbook. manual]. K.: Natsionalna akademiia upravlinnia, 90.
Downloads
Published
Issue
Section
License
Relationship between right holders and users shall be governed by the terms of the license Creative Commons Attribution – non-commercial – Distribution On Same Conditions 4.0 international (CC BY-NC-SA 4.0):https://creativecommons.org/licenses/by-nc-sa/4.0/deed.uk
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
