Assessment of humidity regime of enclosing structures with a ball of insulation on the example of a training housing building in NULES of Ukraine
DOI:
https://doi.org/10.31548/energiya2021.06.097Abstract
When assessing the thermal condition of the building and the parameters of the microclimate of the premises, the main factors influencing its thermal inertia were identified and taken into account. An assessment of the influence of the resistance of enclosing structures on the efficiency of the heating system, taking into account the influence of external and internal climatic parameters in the dynamic mode. It is shown that the time factor and depth of regulation, as well as the outdoor air temperature are important factors. Researches are carried out and the expediency of introduction of a duty mode of heating of buildings of HIGH SCHOOLS is estimated. The given algorithm of control of process of heat release (especially in the presence of a point of "breaking" - average (them) on the schedule) in addition increases accuracy of the decisions of the specified problems and reduces a temperature deviation by 4 ÷ 6 ° C in comparison with usual ("linear") dependence that allows to correct more precisely release of the heat carrier in system of heating of a structure at introduction of a standby mode. It was found that it took about 6.5 hours to achieve normalized air temperature and space heating in the forced (after a long stay on duty). It is shown that the heat consumption of the system in such conditions of its operation compared to the nominal mode increased by 25% (taking into account the limit value of the specific allowance from table H1 DBN B.2.5-67: 2013 "Heating, ventilation and air conditioning"), but for the entire period the action of the standby mode savings amounted to about 6-8% of energy consumed.
Taking into account the design of the outer walls of the object of study, the temperature graph of the heating system was adjusted taking into account the value of the internal heat capacity of the building when implementing on-duty heating, which, according to preliminary estimates, will: improve comfort in the room; to reduce heating costs of the educational and administrative building of NULES of Ukraine by 10-12% for the heating period.
Key words: enclosing structure, humidity conditions, dew point, partial pressure, water vapor
References
Software: «Wet mode of enclosing structures». Available at: https://patriot-nrg.com/content/programne-zabezpechennya-vologisnyy-rezhym-ogorodzhuvalnyh-konstrukciy.
Metody vyboru teploizoliatsiinoho materialu dlia uteplennia budivel [Methods of selection of thermal insulation material for building insulation]: DSTU B B.2.6-189-2013 [Effective from 2013-08-13]. Kyiv: State Standard of Ukraine, 55.
Teplova izoliatsiia budivel [Thermal insulation of buildings]: DBN B.2.6-31: 2016 [Effective from 2016-07-08]. Kyiv: State Standard of Ukraine, 33.
Teplotekhnicheskiy kal′kulyator ograzhdayushchikh konstruktsiy. Raschet utepleniya i tochki rosy dlya stroyashchikh svoy dom [Thermal calculator for building envelopes. Calculation of insulation and dew point for those building their own house]: Available at: https://www.smartcalc.ru/thermocalc?&gp=609&rt=0&ct=0&os=0&ti=20&to=-10&hi=55&ho=85 .
Radko, I.P., Nalyvaiko, V.A., Okushko, O.V., Mishchenko, A.V.,
Antypov, Ye. O. (2018). Pidvyshchennia zakhodiv z enerhoefektyvnosti ta enerhozberezhennia u vyshchykh navchalnykh zakladakh [Enhancing energy efficiency and energy efficiency measures at higher education institutions]. Scientific herald of the NULES of Ukraine, 283, 275 – 280.
Mishchenko, A.V., Shelimanova, O. V., Antypov, І. O. (2014). Analiz teplovoho komfortu u prymishchennyakh navchalʹnoho korpusu №8 NUBiP Ukrayiny pislya termomodernizatsiyi budivli [Analysis of thermal comfort in premises of educational building number 8 of NULES of Ukraine after thermo-modernization of the building]. Scientific herald of the NULES of Ukraine,
(1), 119–123.
Radko, I.P., Nalyvaiko, V. A., Okushko, O. V., Mishchenko, A. V., Antypov, Ye. O. (2018). Metodyka ta obladnannya dlya provedennya enerhetychnoho audytu [Methods and equipment for energy audit]. Energy and automation, 1, 123–134.
Kozyrsky, V.V., Bereka, O. M. Shelimanova, O. V., Antypovm Ye. O. (2012). Rezulʹtaty sproshchenoho enerhoaudytu obʺyektiv NUBiP Ukrayiny [Results of simplified energy audit of NULES of Ukraine]. Power engineering and automation, 1 (11), 55–63.
Downloads
Published
Issue
Section
License
Relationship between right holders and users shall be governed by the terms of the license Creative Commons Attribution – non-commercial – Distribution On Same Conditions 4.0 international (CC BY-NC-SA 4.0):https://creativecommons.org/licenses/by-nc-sa/4.0/deed.uk
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
