Development of design and study of screw working surfaces of auger mechanisms of agricultural machines
DOI:
https://doi.org/10.31548/machenergy2019.04.071Keywords:
screw blank, shelf, experiment, shaping, equipment, SBCP.Abstract
In the article presented the methodology and results of experimental investigations of shelf shaping processes on screw blank are presented. Technological processes of curved profile shaping on the screw blanks with using screw mandrels and shaping roller are developed and experimentally tested. For their implementation a set of technical equipment is designed and manufactured. As the experimental samples screw blanks was used with an outer diameter of 90, 104, 118 mm, internal diameter of 50, 55, and 60 mm, and screw thickness 1, 1.5, 2 mm. Materials of screw blanks - steel 08kp, steel 20, steel 30.References
Vasilkov V. V. (2015). Development of scientifically applied bases of development of technologies of production of screw and screw blanks with the use of unification: dis. Dr. tech. Sciences: 05.02.08. Vasily Vasilovich Vasilkov; Nat. Univ. "Lviv. Polytechnic ». Lviv. 312.
Gevko I. (2015). Synthesis of methods of winding of screw billets [Text] / I. Gevko, O. Katrich // Bulletin of TNTU. Ternopil. Volume 80. Number 4. Art. 153-160.
Gevko I. B., Garmatyuk O. O., Nagornyak G. S., Gupka A. B., Gevko O. M. (2016). Feasibility study of the choice of a method of manufacturing a curved profile on screw spirals. Bulletin of the Kharkiv National Technical University of Agriculture named after Peter Vasylenko. «Resource-saving technologies, materials and equipment in repair production». Issue № 168, 97-103.
Gupka A. (2015). Investigation of the force parameters of the shaping of profile screw elements. MOTROL. Commission of Motorization and Energy in Agriculture. Lublin. Vol. 17, no 7. 111-116.
Danilchenko L. M. (2002). Investigation of stress-deformed state in the process of forming bent billets for screw profiles. Intercollegiate collection (in direction "Engineering mechanics") : Scientific Notes of the LTD. 2002. Vol. 10. 49-57.
Dragan A. P. (2007). Theoretical prerequisites of the technological process of manufacturing screw corrugated billets: dis ... сand. tech. Sciences: 05.02.08 / Dragan Andriy Petrovich; Ternopil state. tech. them I. Pulia. T. 198 p.
Dyachun A. E. (2008). Substantiation of parameters of technological process of manufacturing profile screw blanks: dis. ... cand. tech. Sciences: 05.02.08 / Dyachun Andriy Yevgenovich; TDTU them. I. Pulia. T. 208.
Zhuravlev, A. Z. (1980). Production of augers for combine harvesters / A. Z. Zhuravlev, Y. N. Verzilov, and V. A. Egorov, // Forge-stamping production. Moscow. №5. 29-31.
Mechanisms with screw devices (1993). / [B. М. Gevko, M. G. Danilchenko, R. M. Rohatynskyi and others]. Lviv: World, 208.
Pylypets M. I. (2002). Scientific and technological bases of production of naive billets of machine parts: dis ... Dr. Tech. Sciences: 05.02.08 / Mikhail Il'kovich Pylypets Nat. Univ. "Lviv. Polytechnic ». Lviv, 2002. 445.
Technological bases of forming special profile screw parts (2008). / [B. M. Gevko, O. L. Lyashuk, I. B. Gevko and others]. Ternopil: Ivan Pulyuy TSTU, 367.
Chris Rorres. (2000) The turn of the screw: optimal design of an Archimedes screw/ Jornal of hydrauling/ January. 72-80.
Downloads
Published
Issue
Section
License
Relationship between right holders and users shall be governed by the terms of the license Creative Commons Attribution – non-commercial – Distribution On Same Conditions 4.0 international (CC BY-NC-SA 4.0):https://creativecommons.org/licenses/by-nc-sa/4.0/deed.uk
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
