Modeling and measurement torque and power in transmission rotary wood chipper

Authors

  • I. G. Grabar Zhytomyr National Agroecological University , Житомирський національний агроекологічний університет
  • О.І. Grabar Zhytomyr Polytechnic State University image/svg+xml
  • V. E. Titarenko Zhytomyr Polytechnic State University image/svg+xml
  • M. A. Gorkusha Zhytomyr National Agroecological University , Житомирський національний агроекологічний університет
  • I. O. Voyna Zhytomyr National Agroecological University , Житомирський національний агроекологічний університет

DOI:

https://doi.org/10.31548/bio2016.05.012

Abstract

Simulation and measurement of torque, mechanical stress and power occurs in most transmissions of technological and transport machines. The importance of this problem is considerably increasing in terms of unsteady loads (random, impulsive, alternating etc.). The control of angular speed, especially – torque and power – allows you to control technological machines from the overload and register the real record of their exploitation. The specific role of these systems consists in test drives and transmissions, in the study of the limit load capacity, in the exploration of dynamic parameters and efficiency of transmissions, gearboxes, reducing gears, fans, pumps. Automation of bolted joints assembly, control of mounting bearings, control of the crank-link and crank-rocker mechanisms and transporters also require experimental measurements of angular speed, torque and power.

References

Grabar I. G. Ukraine Patents №№ 83475, 85252, 73063, 91664

Grabar I. G. Bezvesilna O. M. Kubrak Y. O. Percolation tenzoperetvoryuvach linear deformation and theoretical foundations of his work. - Bulletin ZSTU. Engineering. - 2008. - №3 (46), Vol.1.

http://m.ustroistvo-avtomobilya.ru/tormoznaya-sistema/ antiblokirovochnaya-sistema-abs / (Antyblokyrovochnaya system.)

http://www.elec.ru/news/2008/12/25/sovremennye-sredstva-izmerenij-akip-novye-cifrovye. html (Tahometrы AKYP-9201, AKYP-9202)

Yakovlev D. P., Yakovlev S. D. Devices for measuringtorque TO VRASCHAYUSCHEMSYA shaft.

Proceedings of the Odessa Polytechnic University, 2003, Vol. 1 (19)

http://www.lorenz-m.ru/index.php Development and futuretechnologiestorquemeasurement.// WilfriedKrymmel

http://ivdon.ru/magazine/archive/n2y2012/798 DonInzhenernyiJournal. №2, 2012 Measurementtorqueontheshaftvraschayuschyhsya A. S.Hurynov V. Dudnik V. L.Gaponov V. Kalashnikov

Popov A.P., VinokurovM. R.,MoyseenkoA. A. Mykroprotsessornaya contactlesssystem monitoring

and measurementkrutyaschenomoment. - Vestnik DSTU, 2010. T.10. №2 (45) s.243 - 248.

Grabar I. G., Grabar O. I., Hutnichenko O. A., Kubrak Y. O. Percolation-fractal materials. The scientific monograph. - Zhytomyr. - 2007. - 370 p.

http://www.elec.ru/news/2008/12/25/sovremennye-sredstva-izmerenij-akip-novye-cifrovye.html

http://m.ustroistvo-avtomobilya.ru/

http://www.prom-tex.org/products/krmom.html

Downloads

Published

2017-05-11

Issue

Vol. 8 No. 5-6 (2016)

Section

Техніка та енергетика

License

Relationship between right holders and users shall be governed by the terms of the license Creative Commons  Attribution – non-commercial – Distribution On Same Conditions 4.0 international (CC BY-NC-SA 4.0):https://creativecommons.org/licenses/by-nc-sa/4.0/deed.uk

Authors who publish with this journal agree to the following terms:

  • Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
  • Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  • Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).