Three-dimensional mathematical model of the induction-type heat generator. voltage mode

Authors

  • A. Zhyltsov Institute of Electrodynamics image/svg+xml
  • A. Berezyuk National University of Life and Environmental Sciences of Ukraine image/svg+xml
  • S. Usenko National University of Life and Environmental Sciences of Ukraine image/svg+xml
  • B. Yarmolenko National University of Life and Environmental Sciences of Ukraine image/svg+xml

DOI:

https://doi.org/10.31548/energiya1(71).2024.015

Abstract

Induction type heat generators are widely used in technologies for drying materials of natural and artificial origin. This allows using non-contact action on the heat carrier, unlike traditional heat generators, where air heated by the products of combustion of mineral fuel acts as a drying agent, to exclude the impact of carcinogens on the final product, to ensure fire safety in the absence of an open flame, does not pollute the environment with combustion products in due to their absence. Despite the fairly wide industrial implementation of these technologies, the issue of creating new and improving known induction heating systems for drying technologies of natural and artificial origin remains relevant, and their design methods require further development and generalization. The purpose of this work is to develop, using the method of secondary sources, a mathematical model for the analysis of the three-dimensional magnetic field in a three-phase heat generator of the induction type, taking into account the symmetry of its geometry, powered by a three-phase voltage source. On the basis of the method of secondary sources, a three-dimensional mathematical model of an induction-type heat generator was developed when it is powered by a three-phase voltage source with a load in the form of unbonded ferromagnetic conductive tubes/rods, taking into account the symmetry of the density distribution of secondary sources of the electromagnetic field, which allows rational use of computing resources, conducting analysis influence of the geometrical, electrophysical, mode parameters of the induction type heat generator on heat losses in the loaded, which are heat sources for heating the coolant.

Key words: heat generator, induction heating, modeling, method of secondary sources, method of integral equations

References

Kondratenko, I.P., Zhiltsov, A.V., Berezyuk, A.O., Kryshchuk, R.S. (2018). Elektrotehnologichni kompleksi dlya sushinnya zerna na osnovi indukcijnih teplogeneratoriv [Electrotechnological complexes for grain drying based on induction heat generators]. Comprint, Kyiv, 386.

Zablodskiy, M, Zhiltsov, A, Kondratenko, I, Gritsyuk, V. (2017). Conception of efficiency of heat electromechanical complex as hybrid system. IEEE First Ukraine Conference on Electrical and Computer Engineering (UKRCON), Ukraine, 2017. 399 – 404.

Zablodskiy, M, Zhiltsov, A, Nalyvaiko, V, et al. (2020) Biomass Pyrolysis Using a Multifunctional Electromechanical Converter and a Magnetic Field. Scientia agriculturae bohemica, 51(2), 65–73.

Zaiets, N., Shtepa, V., Kondratenko, I., Zhyltsov, A., Rohovik, A. (2021). The use of electrotechnical equipment for food production wastewater treatment. Przegląd elektrotechniczny, R. 97 NR 9/2021, 106 – 109. doi: 10.15199/48.2021.09.22.

Valchev, V. C., Mareva, D. J. (2016). Considerations for components selection of inverter for induction heating. 2016 XXV International Scientific Conference Electronics (ET), Sozopol, Bulgaria, 1 – 4. doi: 10.1109/ET.2016. 7753519.

Jankowski, T.A., Pawley, N.H., Gonzales, L.M., Ross, C.A., Jurney, J.D. (2016). Approximate analytical solution for induction heating of solid cylinders. Applied Mathematical Modelling, vol. 40, 2770 – 2782. doi: 10.1016/j.apm.2015.10. 006.

Areitioaurtena, M., Segurajauregi, U., Akujärvi, V., Fisk, M., Urresti, I., Ukar, E. (2021). A semi-analytical coupled simulation approach for induction heating. Adv. Model. and Simul. in Eng. Sci. doi: 10.1186/s40323-021-00199-0.

Mohammad Zhian Asadzadeh, Peter Raninger, Petri Prevedel, Werner Ecker, Manfred Mücke. (2019) Inverse Model for the Control of Induction Heat Treatments. Materials, 12.2826. doi: 10.3390/ma12172826.

Berezyuk, A. O. (2013). Elektromagnitni ta teplovi procesi v sistemah indukcijnogo nagrivu teplonosiyiv [Electromagnetic and thermal processes in systems of induction heating of coolants]. Kyiv.

Tozony, O.V., Maergoyz, I.D. (1974) Raschet trehmernyh elektromagnitnyh polej [Calculation of three-dimensional electromagnetic fields]. Kyiv: Technika. 351.

Rashchepkin, A., Kondratenko, I., Karlov, O. and Kryshchuk, R. (2022) Metodika rozrahunku elektromagnitnogo polya spiralnoyi indukcijnoyi sistemi dlya manitoimpulsnoyi obrobki nemagnitnih metalevih smug z feromagnitnim ekranom [The method of calculating the electromagnetic field of the spiral induction system for manito-pulse processing of non-magnetic metal strips with a ferromagnetic screen]. Tekhnicnha Electrodynamika, 2022, No 2, 43 – 51. doi: 10.15407/techned2022.02.043.

Pliuhin, V., Zablodskiy, M, Sukhonos, M, Tsegelnyk, Y., Piddubna, L. (2022). Determination of Massive Rotary Electric Machines Parameters in ANSYS RMxprt and ANSYS Maxwell. Lecture Notes in Networks and Systems. 2023 International Conference on Smart Technologies in Urban Engineering, STUE 2022, Kharkiv, 9 – 11 June 2022, V. 536 LNNS, 189 – 201.

Zablodskiy, M.M., Pliuhin, V.E., Kovalchuk, S.I., Tietieriev, V.O. (2022). Indirect field-oriented control of twin-screw electromechanical hydrolyzer. Electrical Engineering & Electromechanics, 2022, No. 1, 3 – 11. doi: 10.20998/2074-272X.2022.1.01.

Bereziuk, A., Karlov, O., Kryshchuk, R., Garasymchuk, I., Potapskyi, P., Vusatyi, M. (2023). Vortex currents and magnetic forces of non-magnetic plate in the process of magneto-pulse treatment on the ideal ferromagnetic platform. Przegląd elektrotechniczny, R. 99 NR 5/2023, 8 – 12. doi:10.15199/48.2023.05.02.

Zablodsky, N., Kovalchuk, S., Bereziuk, A., Zhyltsov, A., Gritsyuk, V. (2021). The Numerical Analysis of Vibration Parameters in the Working Element of Twin-Screw Eectromechanical Hydrolyser for Poultry by-Products Processing. Proceedings of the 20th IEEE International Conference on Modern Electrical and Energy Systems, MEES 2021.

Herasymenko, P. (2021). Mathematical analysis of dual-frequency load current of two-inverter power supply for induction heating systems. Przeglad Elektrotechniczny, 97(3), 69 – 74. doi: 10.15199/48.2021.03.13.

Bereziuk, A., Karlov, O., Kryshchuk, R., Mrachkovsky, A., Nalyvaiko, V. (2020). Improved method of calculation the electromagnetic generator for environmentally friendly method of forming coolant. 6th International Conference on Renewable Energy Sources, ICoRES 2019 Krynica12-14 June 2019. E3S Web of Conferences, V. 154, 04002, 7. doi: 10.1051/e3sconf/202015404002.

Sorokin, D., Knizhka, T. (2022). Simulation of a Magnetic System With a Ferromagnetic Shell. IEEE 41st Interna-tional Conference on Electronics and Nanotechnology (ELNANO). Kyiv, Ukraine, 10-14 October 2022, 409 – 413. doi: 10.1109/ELNANO54667.2022.9927022.

Sorokin, D. (2020). Simulation of High-frequency Induction Heating. 10th International Conference on Advanced Computer Information Technologies (ACIT). Deggendorf, Germany, 16-18 September 2020, 39 – 42. doi: 10.1109/ACIT49673.2020.9208997.

Sorokin, D. (2020) Simulation of the Force Characteristic of the “Coil-Permanent Magnet” System in the Presence of Ferromagnetic Elements. IEEE XXVth International Seminar/Workshop Direct and Inverse Problems of Electro-magnetic and Acoustic Wave Theory (DIPED). Tbilisi, Georgia, 15-18 September 2020, 59 – 62. doi: 10.1109/DIPED49797.2020.9273405.

Zhiltsov, A., Sorokin, D. (2015). The calculation of the magnetic field in the working area of the linear motor with permanent magnets. 16th International Conference on Computational Problems of Electrical Engineering (CPEE). Lviv, Ukraine, 02 – 05 September 2015, 252 – 254. doi: 10.1109/CPEE.2015.7333390.

Bereziuk, A., Karlov, O., Kryshchuk, R., Garasymchuk, I., Potapskyi, P., Vusatyi, M. (2021) Energy parameters of induction heat generator with branched heat exchanger for production of environmentally friendly coolant. Przegląd elektrotechniczny, R. 97 NR 7/2021, 48 – 51.

Zhyltsov, A.V., Bereziuk, A.O., Vishtak, T.V. (2022). Three-dimensional mathematical model of three-phase heat generator of induction type based on the method of secondary sources. Tekhnicnha Electrodynamika, No 5, 3 – 10. doi: 10.15407/techned2022.05.008.

Zhiltsov, A.V., Zaiets, N.A., Bereziuk, A.O., Gai, O.V., Lyktei, V.V. (2023). Eddy currents calculation in a three-phase induction-type heat generator using the secondary sources method. Current mode. Tekhnicnha Electrodynamika, No. 4, 3 – 10. doi: 10.15407/techned2023.04.003.

Downloads

Published

2024-04-08

Issue

No. 1 (2024)

Section

Статті

License

Relationship between right holders and users shall be governed by the terms of the license Creative Commons  Attribution – non-commercial – Distribution On Same Conditions 4.0 international (CC BY-NC-SA 4.0):https://creativecommons.org/licenses/by-nc-sa/4.0/deed.uk

Authors who publish with this journal agree to the following terms:

  • Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
  • Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  • Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).