Evaluation of the energy efficiency of heat supply systems of a residential building with heat pumps based on computer simulation
DOI:
https://doi.org/10.31548/energiya1(71).2024.142Abstract
This article presents an analysis of the energy efficiency of the heating system of a single-family residential building with the integration of a heat pump (HP) using climate data for Kyiv city. Specialized software complexes for calculation (GeoT*SOL), dynamic energy modeling (DesignBuilder/EnergyPlus), and techno-economic justification of HP systems implementation (RETScreen) were used for this purpose. The analysis was conducted for two types of HPs: air-to-water (air-based) and ground-source (ground-based), considering various temperature regimes of the indoor heating system. Based on the modeling results, it was determined that for an air-to-water HP with a nominal capacity of 7 kW, the average seasonal efficiency rating could be approximately 3.6 for the HP itself and 2.7 for the overall system. For a ground-source HP with a nominal capacity of 6 kW, the average seasonal efficiency rating is 4.7 for the HP itself and 3.75 for the overall system. The total electricity consumption varies within the range of 4800–5700 kWh for air-based HP and 3200–4300 kWh for ground-based HP. Depending on the HP capacity, the share of heating energy coverage ranges from 85-98% for ground-based HP and 79-98% for air-based HP. The simple payback period of the HP-based heating system compared to electric convectors is 15.2–17.0 years.
Key words: energy efficiency, building energy modeling, climate data, heat pump, nearly zero-energy buildings
References
European Parliament and Council Directive 2010/31/EU of 19 May 2010 on the energy performance of buildings. Retrieved from: https://zakon.rada.gov.ua/laws/show/984_011-10#Text
On Energy Efficiency of Buildings: Law of Ukraine dated 22.06.2017 No. 2118-VIII. Holos Ukrainy. 2017. July 22. (No. 134). Retrieved from: https://zakon.rada.gov.ua/laws/show/z0825-18#n16
State Building Codes V.2.6–31:2021. Thermal insulation and energy efficiency of buildings. Replaces State Building Codes V.2.6–31:2016; effective from 2022-09-01. Official ed. Kyiv: State Enterprise "Ukrarhbudinform", 2021. 23 p.
Basok, B.I., Nedbaylo, O.M., Tkachenko, M.V., Bozhko, I.K., Lysenko, O.M., & Lunina, A.O. (2015). Modernizatsiia systemy opalennia budivli z vykorystanniam teplovoho nasosa typu "povitria-ridyna" [Modernization of building heating system using air-liquid heat pump]. Promyshlennaya Teplotekhnika, 37(5), 68-74. [In Ukrainian]. https://doi.org/10.31472/ihe.5.2015.08
Gaur, A.S., Fitiwi, D.Z., & Curtis, J. (2021). Heat pumps and our low-carbon future: A comprehensive review. Energy Research & Social Science, 71, 101764. https://doi.org/10.1016/j.erss.2020.101764
Marguerite, C., Geyer, R., Hangartner, D., Lindahl, M., & Pedersen, S.V. (2019). IEA Heat Pumping Technologies Annex 47. Retrieved from: https://heatpumpingtechnologies.org/annex47/wp-content/uploads/sites/54/2019/03/task3-report.pdf
Afjei, Thomas, & Dott, Ralf. (2011). Heat pump modelling for annual performance, design and new technologies. Proceedings of Building Simulation 2011: 12th Conference of International Building Performance Simulation Association. Available at: https://www.researchgate.net/publication/267705775_Heat_pump_modelling_for_annual_performance_design_and_new_technologies.
Chirin, D.A., & Irodov, V.F. (2020). Matematychne ta komp’iuterne modeliuvannia systemy teplopostachannia vid soniachnykh plivkovykh kolektoriv z teplovym nasosom [Mathematical and computer modeling of a heating system from solar film collectors with a heat pump]. Scientific Notes of V.I. Vernadsky Tavria National University, Technical Sciences Series, 5, 135–140.
Golovko, V.M., & Mikhaylin, V.I. (2023). Systema opalennia pryvatnoho budynku na osnovi teplovoho nasosu ta fotoelektrostantsii [Heating system of a private house based on a heat pump and a photovoltaic power station]. Energy and Automation, 2, 63–70. .
He, M., Rees, S., & Shao, L. (2011). Simulation of a domestic ground source heat pump system using a three-dimensional numerical borehole heat exchanger model. Journal of Building Performance Simulation, 4, 141–155. https://doi.org/10.1080/19401493.2010.513739
Ashfaque Ahmed Chowdhury, M. G. Rasul, M. M. K. Khan. (2007). Modelling and simulation of building energy consumption: a case study on an institutional building in central Queensland, Australia. Building Simulation, Beijing, China. Retrieved from https://www.aivc.org/resource/modelling-and-simulation-building-energy-consumption-case-study-institutional-building.
Priarone, F., Silenzi, Federico, & Fossa, G. (2020). Modelling Heat Pumps with Variable EER and COP in EnergyPlus: A Case Study Applied to Ground Source and Heat Recovery Heat Pump Systems. Energies, 13, 794. https://doi.org/10.3390/en13040794
Sukhodub, I.O., Shklyar, V.I., & Dubrovska, V.V. (2022). Analiz faktychnykh, typovykh ta normatyvnykh klimatychnykh danykh v kontekcti enerhetychnoho modeliuvannia budivel [Analysis of actual, typical and normative climatic data in the context of energy modeling of buildings]. Energy: Economics, Technologies, Ecology, 2, 35–40. [In Ukrainian]. https://doi.org/10.20535/1813-5420.2.2022.261367
Downloads
Published
Issue
Section
License
Relationship between right holders and users shall be governed by the terms of the license Creative Commons Attribution – non-commercial – Distribution On Same Conditions 4.0 international (CC BY-NC-SA 4.0):https://creativecommons.org/licenses/by-nc-sa/4.0/deed.uk
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).