Continuous bending of minimal surfaces, formed by means of plane curves of complex curvature
DOI:
https://doi.org/10.31548/machenergy2020.01.051Keywords:
оne-parameter set of associated minimal surfaces, isotropic line, logarithmic spiral, evolvent of the circle, function of a complex variable, сomplex curvature, mean curvature of a surface.Abstract
Analytical description of an оne-parameter set of an associated minimal surfaces formed under their continuous bending, using complex variable was made. To find the equation of isotropic lines, parametric equations of logarithmic spiral and evolvent of circle defined by functions of natural parameter with complex curvature were used. Isotropic lines parametric equations are obtained from the condition of differential arc of spatial curve equality to zero. Analytical description of minimal surfaces and connected minimal surfaces were made in complex space with isotropic lines of grid transfer. Expressions of the first and second quadratic forms of generated minimal surfaces coefficients were found. It is shown that the mean curvature of formed minimal surfaces equals zero at all points. We investigated that minimum surface and connected minimal surface, which are formed on the base of isotropic line with the help of a logarithmic spiral with curvature of complex value share common properties with appropriate curvature surfaces built using logarithmic spiral curvature of actual value. Using various methods of analytical description of isotropic lines with evolvent of circle with curvature of complex value, minimal surfaces that with the replacement of variable have common properties with a curvature, but different metric characteristics were constructed. Analytical description of one-parameter set of associated minimal surfaces allows to control their shape for solving various applications. Parametric equations of minimal surfaces were found in the form of elementary functions, allowing to explore their geometric properties and differential characteristics to optimize engineering methods of technical forms and architectural constructions design.References
Pilipaka S. F., Babka V. N., Zaharova T. N. (2013). Сonstructing of flat curves in polar system of coordinates according to set properties at rotation around them pole. MOTROL. Commission of Motorization and Energetics in Agriculture. Lublin, Vol. 15, No 3. 163-170.
Pilipaka S. F., Nesvidomin A. V., Zaharova T. N. (2013). Form of axis of flexible incompressible bar at its pushing on rough ramp with permanent speed. MOTROL. Commission of Motorization and Energetics in Agriculture. Lublin, Vol. 15, No 4. 198-205.
Pylypaka S., Kremetz Ya., Kresan T. (2015). Projection of a mouldboard from a ruled surface on the set geodesic curve - a limiting mechanical trajectory of a seam. MOTROL. Commission of Motorization and Energetics in Agriculture. Lublin, Vol. 17, No 3. 104-118.
Pilipaka S. F., Grishhenko I. Ju., Pilipaka T. S. (2010). The study of motion of particles on the inner surface of the inclined cylinder that rotates on its axis. MOTROL. Motoryzacja i energetyka rolnictwa. Tom 12B. Lublin. 115-120.
Klendiy N., Pilipaka S. (2015). The particle motion on the internal rough surface of a rotating cone with vertical axis. MOTROL. Commission of Motorization and Energetics in Agriculture. Lublin, Vol. 17, No 3. 73-83.
Nesvidomin V. N., Pylypaka T. S., Kremetz T. S. (2014). Method of analytical mapping of flat images onto curvilinear surfaces. MOTROL. Commission of Motorization and Energetics in Agriculture. Lublin, Vol. 16, No 3. 58-65.
Klyachin A. A., Truhlyaeva I. V. (2016). On convergence of polynomial solutions of minimal surface. Ufa Mathematical Journal, 8(1), 68-78. https://doi.org/10.13108/2016-8-1-68
Klyachin A. A., Panchtnko A. G. (2016). Modeling minimum triangulated surfaces: error estimation calculating the area of the design of facilities. Science Journal of Volgograd State University. Mathematics. Physics, 3(34), 73-83.
https://doi.org/10.15688/jvolsu1.2016.3.7
Abdyushtv A. A., Miftakhutdinov I. Kh., Osipov P. P. (2009). Design of shallow shells minimal surface. Kazan State University of Architecture and Engineering news, 2 (12), 86-92.
Bukhtyak M. S. (2017). Generalization of minimal surfaces and simulation of the shape of an orthotropic material construction. Tomsk state university journal of mathematics and mechanics, 45, 5−24. https://doi.org/10.17223/19988621/45/1
Pylypaka S. F., Mukvich M. M. (2016). Construction a minimal surfaces using isotropic curves lying on the surfase of a torus. MOTROL: International Journal on Operation of Farm and Agri-Food Industry Machinery, 18(3), 101-110.
Pylypaka S. F., Mukvich M. M., (2016). Analytical description isotropic line on surface pseudosphere and construction minimal surfaces. Scientific herald of national university of life and environmental sciences of Ukraine. Series: Technique and energy of APK, 254, 202-210.
Downloads
Published
Issue
Section
License
Relationship between right holders and users shall be governed by the terms of the license Creative Commons Attribution – non-commercial – Distribution On Same Conditions 4.0 international (CC BY-NC-SA 4.0):https://creativecommons.org/licenses/by-nc-sa/4.0/deed.uk
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
