Influence of voltage asymmetry on the energy characteristics of feed mixers
DOI:
https://doi.org/10.31548/energiya5(75).2024.014Abstract
The conducted studies have shown that deviations and asymmetry of the output have the greatest impact on the electric drives of production machines and mechanisms.
Studies on the influence of voltage asymmetry on the technological characteristics of working machines and mechanisms have shown that with voltage asymmetry their productivity decreases. However, there are no studies on the influence of voltage asymmetry on the energy characteristics of working machines.
The purpose of the study is to establish the influence of voltage asymmetry on the energy characteristics of feed mixers.
With voltage asymmetry, constant and variable losses in an asynchronous electric motor change, which cause an increase in energy losses in an asynchronous electric drive.
The energy assessment of the electric drive of feed mixers was carried out by specific electricity consumption.
A study of the influence of voltage asymmetry on the energy characteristics of feed mixers was conducted. The dependence of the specific electricity consumption on the change in the rigidity of the mechanical characteristic of the electric motor, which is due to voltage asymmetry, was obtained. It has been established that with voltage asymmetry, slip and power losses increase. As a result, the specific power loss in the electric drives of feed mixers increases.
Key words: feed mixer, voltage asymmetry, power, mixer performance, specific power consumption
References
Adamova, S. (2018). Analiz vplyvu yakosti elektroenerhii na robotu strumopryimachiv [Analysis of the impact of electricity quality on the operation of current collectors]. Naukovyi visnyk Tavriiskoho derzhavnoho ahrotekhnolohichnoho universytetu, 8 (2), 1-10.
Pakkawee, Hayamin, Chaiyapon, Thongchaisuratkrul (2018). Effects of Induction Motor Using Unbalance Voltage. International Journal of the Computer, the Internet and Management, 26 (3), 98-103.
Patil, R. U., Chaudhari, H. B. (2015). Behavior of Induction Motor at Voltage Unbalanced. International Journal of Engineering Research & Technology (IJERT), 4 (5), 1344 – 1348.
Sinyavsky, O. Yu., Savchenko, V. V., Lavrinenko, Yu. M., Voitiuk, D. H., Bunko, V. Ya., Ramsh, V.Yu. (2020). Elektropryvod vyrobnychykh mashyn i mekhanizmiv [Electric drive of production machines and mechanisms]. Kyiv: FOP Yamchynskyi O.V., 444.
Sinyavsky A. Yu., Horobets V. H. (2010). Vplyv yakosti elektroenerhii na enerhetyku elektropryvodiv v ustalenomu rezhymi [The influence of electricity quality on the energy of electric drives in the steady state]. Naukovyi visnyk NUBiP Ukrainy, 153, 133 – 138.
Sinyavsky, O., Savchenko, V., Solomko, N., Kisten, V., Zalozny, R. (2021). Influence of electricity quality on technological characteristics of agricultural machines. Przeglad Elektrotechniczny, 97(8), 84–87.
Sinyavsky, A. Yu., Savchenko, V. V., Kozyrskyi V. V. (2019). Elektropryvod i avtomatyzatsiia [Electric drive and automation]. Kyiv: FOP Yamchynskyi O. V., 619.
Downloads
Published
Issue
Section
License
Relationship between right holders and users shall be governed by the terms of the license Creative Commons Attribution – non-commercial – Distribution On Same Conditions 4.0 international (CC BY-NC-SA 4.0):https://creativecommons.org/licenses/by-nc-sa/4.0/deed.uk
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).