Experimental study of environmental factors' impact on surface leakage currents of high-voltage support insulators
DOI:
https://doi.org/10.31548/Abstract
Ensuring the reliability of high-voltage insulation systems is critical for the safe and efficient operation of power equipment. Surface leakage currents, formed under the influence of atmospheric and anthropogenic factors, accelerate the aging of insulation materials, reduce their dielectric strength, and increase the risk of emergency failures. Particular attention is given to the combined impact of relative humidity, temperature fluctuations, surface contamination, and wind speed, which together create highly unfavorable conditions for the operation of insulation systems and necessitate the implementation of automated approaches to monitoring and managing their condition.
The aim of this work is to experimentally determine the influence of key climatic and anthropogenic factors on the leakage currents of support insulators, to assess the relative contribution of these factors, and to construct generalized graphical dependencies. The results obtained can be used to predict the performance of insulation systems and to develop automated methods for optimizing the operating modes of power equipment.
The research was conducted on IOS-35-1000 UHL insulators operated at substations in the central region of Ukraine.
It was found that the dominant influencing factors are relative humidity (30%), negative temperature difference (25%), and surface contamination (20%). Absolute humidity, duration of moisture exposure, and wind speed have a secondary effect on leakage current, with wind partially reducing surface conductivity. The experimental graphical dependencies reflect the dynamics of conductive layer formation under various moistening conditions.
Critical operating conditions for insulation systems arise when high humidity, negative temperature differences, and the presence of a hygroscopic contamination layer are combined. The results obtained can be used to predict the reliability of insulation structures and to improve automated insulation condition monitoring systems.
Key words: high-voltage insulator, leakage current, surface contamination, atmospheric factor, experimental study.
References
1. Khan, U. A., Asif, M., Zafar, M. H., & et al. (2025). Experimental validation of machine learning for contamination classification of polluted high-voltage insulators using leakage current. Scientific Reports, 15, 13246.
2. Salem, A. A., Lau, K. Y., Rahiman, W., Abdul-Malek, Z., Al-Gailani, S. A., Rahman, R. A., & Al-Ameri, S. (2022). Leakage current characteristics in estimating insulator reliability: Experimental investigation and analysis. Scientific Reports, 12, 14974.
3. Sopelsa Neto, N. F., Stefenon, S. F., Meyer, L. H., Ovejero, R. G., & Leithardt, V. R. Q. (2022). Fault Prediction Based on Leakage Current in Contaminated Insulators Using Enhanced Time Series Forecasting Models. Sensors, 22(16), Article 6121.
4. Szamel, L., & Oloo, J. (2024). Monitoring of Stator Winding Insulation Degradation through Estimation of Stator Winding Temperature and Leakage Current. Machines, 12(4), 220.
5. Matos-Carvalho, J. P., Stefenon, S. F., Leithardt, V. R. Q., & Yow, K. C. (2025). Time series forecasting based on optimized LLM for fault prediction in distribution power grid insulators. arXiv preprint arXiv:2502.17341.
6. Kotysh, A. I. (2004). Investigation of surface overlap processes of 10-35 kV support insulators as a function of leakage current. Bulletin of NTU ‘KhPI’, Vol. Electrical Power Engineering and Conversion Technology. –Kharkiv: NTU ‘KhPI’, (7), 133-138.
7. Saleem, M. Z., & Akbar, M. (2022). Review of the performance of high-voltage composite insulators. Polymers, 14(3), 431.
8. Lim, D.-Y., & Bae, S. (2015). Study on oxygen/nitrogen gas mixtures for the surface insulation performance in gas insulated switchgear. IEEE Transactions on Dielectrics and Electrical Insulation, 22(3):1567-1576
9. Baskin, J. (2006). Methods to mitigate contamination and moisture ingress in switchgear. In 2006 IEEE 11th International Conference on Transmission & Distribution Construction, Operation and Live-Line Maintenance (ESMO) (pp. 1–6).
10. Shinkai, H., Goshima, H., & Yashima, M. (2011). A study on condition assessment method of gas-insulated switchgear. Part II. Influence of moisture in the SF₆, detection of a partial discharge on a spacer, repetition discharge and overheating by incomplete contact. Electrical Engineering in Japan.
11. Kotysh A. I., Petrova K. G., Savelenko I. V. and Serebrennikov S. V. (2023) Diagnosis of the condition of high-voltage support insulators based on leakage currents. Energy and Automation, (2), 71-83.
Published
Issue
Section
License
Copyright (c) 2025 Energy and Automation
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Relationship between right holders and users shall be governed by the terms of the license Creative Commons Attribution – non-commercial – Distribution On Same Conditions 4.0 international (CC BY-NC-SA 4.0):https://creativecommons.org/licenses/by-nc-sa/4.0/deed.uk
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
