Intellectualization of vacuum circuit breakers in medium- and high-voltage networks
DOI:
https://doi.org/10.31548/Keywords:
vacuum circuit breaker, digital substation, IEC 61850, technical diagnostics, switching life, vacuum arc, SCADAAbstract
The relevance of the study is обусловлена the need to improve the reliability and safety of switching equipment in medium- and high-voltage networks under conditions of substation digitalization and the transition to condition-based maintenance. The aim of the study is to substantiate the feasibility of using vacuum circuit breakers in combination with digital monitoring systems and to develop an approach to the integrated assessment of their technical condition. To achieve this aim, analytical, comparative, and structural-functional research methods were applied; scientific sources and the provisions of IEC 62271-100 and IEC 61850-3 standards were analyzed. The paper summarizes the advantages of vacuum circuit breakers in comparison with oil, air, and SF6 analogues and identifies the most informative diagnostic parameters, namely operating time, contact resistance, local overheating, drive vibration condition, and consumed switching life. An integrated technical condition index is proposed, combining electrical, thermal, mechanical, temporal, and resource-related indicators and enabling the determination of equipment maintenance priorities. It has been established that the integration of vacuum circuit breakers with digital controllers, sensors, and the SCADA level based on IEC 61850 increases the informativeness of monitoring, facilitates early detection of degradation processes, and creates prerequisites for predictive maintenance. The practical significance of the results lies in the possibility of their application in the modernization of switchgear at industrial and agro-industrial enterprises.
Recieved: 18.01.2026. Recieved: 01.04.2026. Accepted: 17.04.2026.
References
1. Ohanu, C. P., Rufai, S. A., & Oluchi, U. C. (2024). A comprehensive review of recent developments in smart grid through renewable energy resources integration. Heliyon, 10(3), e25705. https://doi.org/10.1016/j.heliyon.2024.e25705
2. Ethirajan, V., & Mangaiyarkarasi, S. P. (2025). An in-depth survey of latest progress in smart grids: Paving the way for a sustainable future through renewable energy resources. Journal of Electrical Systems and Information Technology, 12, Article 9. https://doi.org/10.1186/s43067-025-00195-z
3. Pranjić, F., & Virtič, P. (2024). Analysis of the operational reliability of different types of switching substations using the Monte Carlo method. Energies, 17(13), 3142. https://doi.org/10.3390/en17133142
4. Semenov, A., Bychkov, Y., & Kharak, R. (2026). Digital integration of vacuum switching devices in electrical power network systems. Technical Sciences. International Independent Scientific Journal, 81, 11–16. https://doi.org/10.5281/zenodo.18195837
5. Tsytsak, T. P., Semenova, N. V., & Semenov, A. O. (2025). Pidvyshchennia nadiinosti rozpodilchoho prystroiu 220 kV na teplovii elektrostantsii shliakhom modernizatsii [Improving the reliability of a 220 kV switchgear at a thermal power plant through modernization]. Visnyk Pryazovskoho Derzhavnoho Tekhnichnoho Universytetu. Seriia: Tekhnichni Nauky, 51, 127–133. https://doi.org/10.31498/2225-6733.51.2025.344826
6. Semenov, A. O., Kharak, R. M., Arendarenko, V. M., & Bychkov, Ya. M. (2024). Rozrakhunok vtrat elektroenerhii v rozpodilchykh merezhakh pry elektropostachanni z vykorystanniam maslianykh ta vakuumnykh vymykachiv [Calculation of electric power losses in distribution networks during power supply using oil and vacuum circuit breakers]. Visnyk Natsionalnoho Tekhnichnoho Universytetu “KhPI”. Seriia: Enerhetyka: Nadiinist ta Enerhoefektyvnist, 1(8), 105–110. https://doi.org/10.20998/2224-0349.2024.01.13
7. Slade, P. G., Li, W.-P., Mayo, S., et al. (2007). Vacuum interrupter, high reliability component of distribution switches, circuit breakers and contactors. Journal of Zhejiang University-SCIENCE A, 8, 335–342. https://doi.org/10.1631/jzus.2007.A0335
8. Yao, X., Geng, Y., Liu, Z., & Wang, J. (2015). Mechanical reliability of a 126 kV single-break vacuum circuit breaker. In 2015 Annual Reliability and Maintainability Symposium (RAMS) (pp. 1–7). https://doi.org/10.1109/RAMS.2015.7105196
9. Razi-Kazemi, A. A., & Fallah, M. R. (2021). Investigation of aging procedure of vacuum circuit breakers used in wind farms. Engineering Failure Analysis, 123, 105292. https://doi.org/10.1016/j.engfailanal.2021.105292
10. Weng, L., Xiao, J., Zhang, Z., et al. (2024). Online monitoring method for opening and closing time of 10 kV spring energy storage circuit breaker based on transient electrical signal characteristic point marking and self-calibration. Energies, 17(24), 6436. https://doi.org/10.3390/en17246436
11. Weng, L., Xia, J., Zhang, Z., et al. (2025). Online measurement method for circuit breaker mechanical-time characteristics based on transient voltage and current signal feature extraction. Energies, 18(1), 24. https://doi.org/10.3390/en18010024
12. Apostolov, A. (2022). Artificial intelligence-based circuit breaker monitoring in IEC 61850 digital substations (CIGRÉ Ref. D2-10407_2022). CIGRÉ.
13. International Electrotechnical Commission. (2021). IEC 62271-100:2021 high-voltage switchgear and controlgear – Part 100: Alternating-current circuit-breakers. IEC.
14. International Electrotechnical Commission. (2013). IEC 61850-3:2013 communication networks and systems for power utility automation – Part 3: General requirements. IEC.
15. Semenov, A. O., & Semenova, N. V. (2023). Pidvyshchennia efektyvnosti nasosiv dlia perekachuvannia pulpy tsukrovykh zavodiv z vykorystanniam ekspres-diahnostyky [Improving the efficiency of pumps for pumping sugar factory pulp using express diagnostics]. In Problemy ta perspektyvy rozvytku silskohospodarskoho mashynobuduvannia: Materialy V Vseukrainskoi naukovo-praktychnoi internet-konferentsii (pp. 153–157). Poltava: PDAU.
Published
Issue
Section
License
Copyright (c) 2026 Energy and Automation
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
All materials are disseminated under the terms of the Creative Commons Attribution 4.0 International Public License, which permits others to distribute the manuscript with proper acknowledgement of the authorship and the original publication in this journal.
